Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

BASCOM-AVR 2082

 
Post new topic   Reply to topic    www.mcselec.com Forum Index -> BASCOM-AVR
View previous topic :: View next topic  
Author Message
albertsm

Administrator



Joined: 09 Apr 2004
Posts: 4798
Location: Holland

blank.gif
PostPosted: Sat Aug 03, 2019 3:39 pm    Post subject: BASCOM-AVR 2082 Reply with quote

Version 2082 is available for download. When you use version 2081 you can use the Tools, Update menu to perform the update.

The update is only available as a full setup. In 2082 you will find a lot of changes. An important change is that the DAT files are in their own sub folder.
During installation you can chose where to install the SAMPLE files.
Instead of installing into the Program Files Folder the default is a user writable folder like c:\mcs\basavr2082

The settings file is also stored in the application folder. This way you can have different versions with their own settings file.

The terminal emulator has been replaced. This is needed because of windows 10 security features not available in 32 bit ocx.
The component is still installed because some programmers require this. In the 64 bit version these old programmers will be phased out.

you can view all changes in the 'what is new in 2082' in the help.

I recommend to install in a new folder so you can use old and new versions.

problems should be reported to support.

And lastly : thanks to all the beta testers for testing

(BASCOM-AVR version : 2.0.8.2 )

_________________
Mark
Back to top
View user's profile Visit poster's website
six1

Bascom Expert



Joined: 27 Feb 2009
Posts: 539

germany.gif
PostPosted: Sat Aug 03, 2019 7:13 pm    Post subject: Reply with quote

Thanks a lot Mark!
_________________
For technical reasons, the signature is on the back of this message.
Back to top
View user's profile
Pikczu

Bascom Member



Joined: 22 Jan 2006
Posts: 58
Location: Dublin, Ireland

ireland.gif
PostPosted: Sun Aug 04, 2019 10:56 am    Post subject: Reply with quote

Fantastic work as always Mark.
Thank you !
Back to top
View user's profile
patrick_cpp

Bascom Member



Joined: 26 Feb 2019
Posts: 1

blank.gif
PostPosted: Mon Aug 05, 2019 10:21 am    Post subject: Reply with quote

Hello,
I installed the new version Very Happy and unfortunately I found the first bug.
The function "Allow multiple interfaces" does not work. I can not open several single Bascom AVR programs.[/img]
Back to top
View user's profile
JC

Bascom Member



Joined: 15 Dec 2007
Posts: 458
Location: Cleveland, OH

usa.gif
PostPosted: Mon Aug 05, 2019 6:32 pm    Post subject: Reply with quote

Aug. 5th, 2019

Outstanding!

Thank you for the update!

JC
Back to top
View user's profile Visit poster's website
i.dobson

Bascom Expert



Joined: 05 Jan 2006
Posts: 1527
Location: Basel, Switzerland

switzerland.gif
PostPosted: Mon Aug 05, 2019 7:26 pm    Post subject: Reply with quote

Thank, very nice.

I've just recompiled one of my old programs (written for 2.0.7.4) and it worked first time without any modifications.

The only Problem I've found is when I try and open the history.txt file I get the following error "File could not be opened, probably in use by the system".
This is on a 64bit Windows 7, logged on user has "normal rights" (not adminstrator).

Keep up the good work.

Regards
Ian Dobson

_________________
Home of AVRTimer, the Bascom timer value calculator.
http://www.planet-ian.com

Walking on water and writing software to specification is easy if they're frozen.
Back to top
View user's profile Visit poster's website
theo64

Bascom Member



Joined: 05 Jun 2005
Posts: 4

greece.gif
PostPosted: Mon Aug 05, 2019 7:53 pm    Post subject: Reply with quote

Thanks for the update ...i confirm that cannot open second instance also i got a bscavrl.dll missing error when i tried to make a clean install which i solved by copying the file from previous installation...
_________________
Always look for the best and expect the worst
Back to top
View user's profile
Printpix52

Bascom Member



Joined: 18 Jun 2014
Posts: 144
Location: D.F.

mexico.gif
PostPosted: Tue Aug 06, 2019 12:56 am    Post subject: Reply with quote

theo64 wrote:
Thanks for the update ...i confirm that cannot open second instance also i got a bscavrl.dll missing error when i tried to make a clean install which i solved by copying the file from previous installation...


I have the same fault as you but I am going to clean all of them, I made the updates and restarted but it does not open the second version 2082 but version 2081 also a bscavrl.dl message error appears I have to clean all the files.
My computer is window pro 64 bit asus.
greetings to all.

Confused
Back to top
View user's profile
hgrueneis

Bascom Member



Joined: 04 Apr 2009
Posts: 830
Location: A-4786 Brunnenthal

austria.gif
PostPosted: Tue Aug 06, 2019 10:18 am    Post subject: Reply with quote

By now you should know to copy your original bscavrl.dll file to your newly installed directory where the application file is located. The file is linked to your SN.

I have installed 2082 on a 32-bit Win 10 laptop without a problem. Multiple programs load after the setup.

Thanks to Mark Alberts for his great work and letting us have another free update!
The Bascom Software is so advanced now that a charge for updated versions would be reasonable.

Best regards
Hubert
Back to top
View user's profile
MichaelB.

Bascom Member



Joined: 04 May 2017
Posts: 39

germany.gif
PostPosted: Tue Aug 06, 2019 3:11 pm    Post subject: Reply with quote

Yeah!, Thanks for the Update Mark Smile)
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    www.mcselec.com Forum Index -> BASCOM-AVR All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum