Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

bascom end ardunoisp

 
Post new topic   Reply to topic    www.mcselec.com Forum Index -> BASCOM-ARDUINO
View previous topic :: View next topic  
Author Message
marc3

Bascom Member



Joined: 09 Dec 2014
Posts: 14

PostPosted: Tue Jan 13, 2015 4:47 pm    Post subject: bascom end ardunoisp Reply with quote

Dear Members,

I am using bascom 2.0.7.5 on windows xp home end a arduino_uno board, no problem.
Now i wanted to use a arduino_isp programmer ( not the uno ) to program the ATtiny's.
afther installing the driver ( libusb device ), i can't make it working, by chosing progammer end parameter settings.

Can someone explain to me what exactly ineed to set.

Thank you
Back to top
View user's profile
Duval JP

Bascom Member



Joined: 22 Jun 2004
Posts: 866
Location: France

france.gif
PostPosted: Wed Jan 14, 2015 3:17 pm    Post subject: Reply with quote

You have tree ways to program a -controler
1) with Arduino bootloader if you use some -controlers used by the modules Arduino AND compatible Bascom Mega328, Mega2560 to give the well knows.
The help is detailled in the first messages of this forum.

2) With a bootloader. But to put a bootloader as the bascom bootloader in the P you have to use an ISP programmer ! or to buy P with bootloader inside.

3 ) Without bootloader : with one of the programmers (and you have the choice !) compatible Bascom

But your question is, how said Mark, not for this forum. It is a general AVR question.
However, please give more detail to your question :
Quote:
Now i wanted to use a arduino_isp programmer ( not the uno ) to program the ATtiny's.

Which one ?

Bon courage
JP Wink
Back to top
View user's profile Visit poster's website
marc3

Bascom Member



Joined: 09 Dec 2014
Posts: 14

PostPosted: Wed Jan 14, 2015 8:33 pm    Post subject: Reply with quote

hello,
I tried the arduinoISP from the Arduino IDE 1.5.8, and it works properly. sketch programmed (bootloader eraised of uno), but burned back.

Actually I want to continue working with bascom.
Since the arduinoISP supported avrdude, I suppose it can work with bascom IDE.
In the programmer list i choose "external programmer", chip: attiny85,
Program: c: \ avrdude \ avrdude.exe, parameter: -C c: \ avrdude.conf p t85 -P
-com3 arduinoISP -c -b 115200 -U flash: w: {FILE} i

With regards

Marc
Back to top
View user's profile
bzijlstra

Bascom Ambassador



Joined: 30 Dec 2004
Posts: 1179
Location: Tilburg - Netherlands

netherlands.gif
PostPosted: Wed Jan 14, 2015 9:19 pm    Post subject: working? Reply with quote

So it is working?

Well done. The tip has been published before, nice to have it in this Bascom-Arduino part of this forum.

Have fun
Ben Zijlstra
Back to top
View user's profile Visit poster's website
marc3

Bascom Member



Joined: 09 Dec 2014
Posts: 14

PostPosted: Wed Jan 14, 2015 10:43 pm    Post subject: Reply with quote

Sorry that i was not clear.
It is still not working in Bascom.

Kind regards
Back to top
View user's profile
albertsm

Administrator



Joined: 09 Apr 2004
Posts: 4799
Location: Holland

blank.gif
PostPosted: Wed Jan 14, 2015 10:46 pm    Post subject: Reply with quote

try it on the command line first. if that works, it should also work as external programmer.
or you mean it does not work when you select different programmers other than external ones?

_________________
Mark
Back to top
View user's profile Visit poster's website
bzijlstra

Bascom Ambassador



Joined: 30 Dec 2004
Posts: 1179
Location: Tilburg - Netherlands

netherlands.gif
PostPosted: Thu Jan 15, 2015 1:36 pm    Post subject: search for AVRDUDE Reply with quote

Hope you are not including all those spaces in your commandline.

I have done a search in this forum about AVRDUDE and it comes up with a list of all possible solutions for your problem.

Try what Mark is suggesting, from the cmd line. And let us know.

Have fun
Ben Zijlstra
Back to top
View user's profile Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    www.mcselec.com Forum Index -> BASCOM-ARDUINO All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum