Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Programm Arduino with Bascom - step by step solution

 
Post new topic   Reply to topic    www.mcselec.com Forum Index -> BASCOM-ARDUINO
View previous topic :: View next topic  
Author Message
stefan.schroeter

Bascom Member



Joined: 11 Aug 2014
Posts: 2

PostPosted: Wed Aug 13, 2014 9:06 pm    Post subject: Programm Arduino with Bascom - step by step solution Reply with quote

I am using an Arduino Uno R3 and want to programm the Arduino with Bascom. I read and tried the hints in the forum, but nothing will work for me. Finaly i used the http://wiki.mcselec.com/Getting_started_with_Arduino_UNO. This will also not work for my.

the programming windows reacts with an error window. Der Prozedureinsprungpunkt "__ctype_ptr__" wurde in der DLL "C\.... averdude.exe" nicht gefunden. that meas __ctype_ptr could not be found in the dll.

Here is my configuration:
Bascom compiler version :2.0.7.7
Bascom compiler build :2.0.7.7.004
Arduino: original Arduino R3 with an Atmega328p, 28pdip version
Windows 8.1 - Protected by the firewall from gdata 'total protection'
Bascom is running with administrator rights
I am using arduin 1.5.7
My arduino driver ist c:\windows\system32\Drivers\usber.sys

Is there a step by step solution where i can eliminate mistakes made by me?
Back to top
View user's profile
albertsm

Administrator



Joined: 09 Apr 2004
Posts: 4798
Location: Holland

blank.gif
PostPosted: Thu Aug 14, 2014 9:05 am    Post subject: Reply with quote

I assume you did not change the bootloader? So the board still works with the arduino software?
And you will see the COM port in windows device manager?
It should be possible to program with bascom using the arduino programmer option. Select Ardunino programmer, proper COM port and 19200 baud. Using F4 the board should be programmed same as with arduino.
But your first step should be to check if the driver is working and the simplest thing to do is check with arduino software.

_________________
Mark
Back to top
View user's profile Visit poster's website
Duval JP

Bascom Member



Joined: 22 Jun 2004
Posts: 865
Location: France

france.gif
PostPosted: Thu Aug 14, 2014 10:14 am    Post subject: Reply with quote

hello,
well you to , you lost your hair as me with arduino ?
Laughing

I'm still in W7 Windows version I hope it is ok with W8.1

In my last post I show a step by step method.
I hope your hairdresser will be satisfied !
JP Wink
Back to top
View user's profile Visit poster's website
stefan.schroeter

Bascom Member



Joined: 11 Aug 2014
Posts: 2

PostPosted: Thu Aug 14, 2014 12:59 pm    Post subject: Solution Reply with quote

I followed the step by step solution from JP Duval. As if by a miracle my Arduino worked fine with Bascom. Furthermore i took a saint smart uno and ... it works fine. Im happy. Thank you JP.

Thank you, albertsm, for your fast answer. The Arduino works pretty with its software. Maybe yesterday i lost the overview about baud, comport, etc.

What i realy lost is my hair like JP Duval supposed. To submit the evidence i attached a jpg file Very Happy

___________
Best regards

Stefan Schröter
Back to top
View user's profile
albertsm

Administrator



Joined: 09 Apr 2004
Posts: 4798
Location: Holland

blank.gif
PostPosted: Thu Aug 14, 2014 8:20 pm    Post subject: Reply with quote

Very Happy
_________________
Mark
Back to top
View user's profile Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    www.mcselec.com Forum Index -> BASCOM-ARDUINO All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum