hi all glcd 128 * 64 help needed

PaulC · Joined: 09 Jan 2008 Posts: 122 Location: Ireland

hi all glcd 128 * 64 help needed
bought 3 of em from mikroelektronika website.
struggling to use em with full version bascom avr 1.11.9.2
just cannot figure out pinout to glcd config in bascom..
attached file is all info i can get for em..

jenalcom · Posted: Sun Oct 26, 2008 5:15 am Post subject:

Hi

Presuming you have a display with a KS0108 You need a config line near the top of your programme as so:

Config Graphlcd = 128 * 64sed , Dataport = Porta , Controlport = Portc , Ce = 0 , Ce2 = 1 , Cd = 4 , Rd = 3 , Reset = 2 , Enable = 5 , Mode = 6

It appears that the names used in that PDF are different from the Bascom names as:

PDF Bascom
CS1 CE
CS2 CE2
RS CD
RW RD
E Enable
RST Reset

Of course you use the ports that you want to use! Set the contrast pot so that you can just see a faint dark background to make sure it is about right.

Hope that works for you

Alan

PaulC · Joined: 09 Jan 2008 Posts: 122 Location: Ireland

gonna try this today
much appreciated couldn't carry on with project
till sorted this out.
when project finished i will post on forum
many thanks
PaulC

PaulC · Joined: 09 Jan 2008 Posts: 122 Location: Ireland

thank you jenalcom
worked a treat ,when i finally got it
passed that block of wood ,in me head...