Programmer MCS Bootloader_attiny3216_FTDI (CH340)

Printpix52 · Joined: 18 Jun 2014 Posts: 282 Location: D.F.

Hello everybody.

1.-I already updated software to 2084, however I did not want to update it so as not to have a problem.

2.-Four years ago my programmer had them working well without problem.

3.-Sorry I bought an xtiny 3216 for the first time but it won't let me load the program.

4.-I did a test four years ago and nothing works as a FTDI test with Minipro to later test with xTiny 3216.

5.-I attach the photos.

(BASCOM-AVR version : 2.0.8.4 , Latest : 2.0.8.4 )

albertsm · Joined: 09 Apr 2004 Posts: 5916 Location: Holland

What you write is very confusing. You also seem to mix up things.
I doubt you get a serious reply/help this way.
- what do you want to accomplish
- what exact is the problem
- where is the code
- what does not work
- what did you tried
- what do you think readers of the forum understand from this post? best to re-read before you post and imagine and ask your wife/husband or friend if they understand it
Also point 1, what do you mean? is it essential? do we really care if you want or not want to update? you can also use MS-DOS of course.
2: so you mean 'it' worked at some stage? and what was that? which micro? and what did you change in the mean time?
3: this seems unrelated. 4 years ago there were no 3216.
4; i dont understand what you write
But you have to understand one thing : this is NOT THE ARDUINO forum. it is ok to use that hardware but i have no idea which processors all these boards use. And i do not care too. If you use a board, be specific about the processor. that is the only thing that matters to bascom.
5: normally pictures are ok to explain things but in this case posting some pictures is not good.

normally if i have to ask all these questions i ignore such posts. if a poster does not take the time to inform us why would i waste my time?
but i understand language barrier can be a problem. So this is not only to you but anyone that posts.
What i dont get is that you are a long time user and posted many times but somehow you still dont get it. that is discouraging.
I hope some user can help you or understand what your problem is about.

Printpix52 · Joined: 18 Jun 2014 Posts: 282 Location: D.F.

Hola

What you write is very confusing. You also seem to mix up things.
I doubt you get a serious reply/help this way.
- what do you want to accomplish
- what exact is the problem
- where is the code
- what does not work
- what did you tried

I bought my first time attiny 3216 and FTDI (CH340G) and I cannot load a simple program as a test.

Printpix52 · Joined: 18 Jun 2014 Posts: 282 Location: D.F.

The license is worth 83.4 Euro ok I am going to raise money. Very Happy