Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Programmer MCS Bootloader_attiny3216_FTDI (CH340)

 
Post new topic   Reply to topic    www.mcselec.com Forum Index -> BASCOM-AVR
View previous topic :: View next topic  
Author Message
Printpix52

Bascom Member



Joined: 18 Jun 2014
Posts: 248
Location: D.F.

mexico.gif
PostPosted: Thu Jul 22, 2021 7:55 am    Post subject: Programmer MCS Bootloader_attiny3216_FTDI (CH340) Reply with quote

Hello everybody.

1.-I already updated software to 2084, however I did not want to update it so as not to have a problem.

2.-Four years ago my programmer had them working well without problem.

3.-Sorry I bought an xtiny 3216 for the first time but it won't let me load the program.

4.-I did a test four years ago and nothing works as a FTDI test with Minipro to later test with xTiny 3216.

5.-I attach the photos.

(BASCOM-AVR version : 2.0.8.4 , Latest : 2.0.8.4 )


Last edited by Printpix52 on Thu Jul 22, 2021 5:47 pm; edited 1 time in total
Back to top
View user's profile
albertsm

Administrator



Joined: 09 Apr 2004
Posts: 5319
Location: Holland

blank.gif
PostPosted: Thu Jul 22, 2021 2:37 pm    Post subject: Reply with quote

What you write is very confusing. You also seem to mix up things.
I doubt you get a serious reply/help this way.
- what do you want to accomplish
- what exact is the problem
- where is the code
- what does not work
- what did you tried
- what do you think readers of the forum understand from this post? best to re-read before you post and imagine and ask your wife/husband or friend if they understand it
Also point 1, what do you mean? is it essential? do we really care if you want or not want to update? you can also use MS-DOS of course.
2: so you mean 'it' worked at some stage? and what was that? which micro? and what did you change in the mean time?
3: this seems unrelated. 4 years ago there were no 3216.
4; i dont understand what you write
But you have to understand one thing : this is NOT THE ARDUINO forum. it is ok to use that hardware but i have no idea which processors all these boards use. And i do not care too. If you use a board, be specific about the processor. that is the only thing that matters to bascom.
5: normally pictures are ok to explain things but in this case posting some pictures is not good.

normally if i have to ask all these questions i ignore such posts. if a poster does not take the time to inform us why would i waste my time?
but i understand language barrier can be a problem. So this is not only to you but anyone that posts.
What i dont get is that you are a long time user and posted many times but somehow you still dont get it. that is discouraging.
I hope some user can help you or understand what your problem is about.

_________________
Mark
Back to top
View user's profile Visit poster's website
Printpix52

Bascom Member



Joined: 18 Jun 2014
Posts: 248
Location: D.F.

mexico.gif
PostPosted: Thu Jul 22, 2021 5:32 pm    Post subject: Reply with quote

Hola Shocked

What you write is very confusing. You also seem to mix up things.
I doubt you get a serious reply/help this way.
- what do you want to accomplish
- what exact is the problem
- where is the code
- what does not work
- what did you tried

I bought my first time attiny 3216 and FTDI (CH340G) and I cannot load a simple program as a test.


Code:
$Regfile="atxtiny3216.dat"
$Crystal=20000000
$hwstack=40
$swstack=16
$framesize=32
 


Sorry I read a mistake ..... You have to pay license first. Mr. Green Mr. Green Brick wall Brick wall

Code:
Error : 500   Line :   22    XTINY LICENSE Required  , in File : C:\Users\Bienvenido\Desktop\Tiny3216\1.bas
 


Laughing Embarassed
Back to top
View user's profile
Printpix52

Bascom Member



Joined: 18 Jun 2014
Posts: 248
Location: D.F.

mexico.gif
PostPosted: Thu Jul 22, 2021 5:45 pm    Post subject: Reply with quote

The license is worth 83.4 Euro ok I am going to raise money. Very Happy Wink
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    www.mcselec.com Forum Index -> BASCOM-AVR All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum