attiny816 uart problem

marcomilazzo · Joined: 12 Oct 2005 Posts: 19

Hi
how do i set the baud in the attiny816 micro?
$baud returns error

$regfile = "atXtiny816.dat"
$hwstack = 40
$swstack = 16
$framesize = 24

$crystal = 4000000

Config Sysclock = 16 , Prescale = 4

$baud=9600 ' .EQU not found, probably using functions that are not supported by the selected chip [UBRR]

thank's for any help

marco

(BASCOM-AVR version : 2.0.8.3 )

albertsm · Joined: 09 Apr 2004 Posts: 5921 Location: Holland

marcomilazzo · Joined: 12 Oct 2005 Posts: 19

hi mark
nice to hear you after so much time !!
do you have an email
mine is always the same

is it possible to use the attiny816 at 115200 baud with 3.3v ?
can you send me a complete example ?
i need to use the uart
marco

marcomilazzo · Joined: 12 Oct 2005 Posts: 19

Config Com1 = 19200 , Mode = Asynchroneous , Parity = None , Databits = 8 , Stopbits = 1
error Error : 86 Line : 37 Invalid parameter for CONFIG parameter or value [ASYNCHRONEOUS] , in File : C:\Users\Marc\Documents\example5.bas

marcomilazzo · Joined: 12 Oct 2005 Posts: 19

hi mark

i think i must buy the addon . correct ?
no problem if it's the limitation
if so i suggest an error were it says to get the addon

marco

albertsm · Joined: 09 Apr 2004 Posts: 5921 Location: Holland

hi Marco

yes long time ago. i will send you an email. Mine has not changed either btw Very Happy

the one you use for the forum does not work however. you best update it. otherwise the forum will not send you emails when a topic is replied to.

anyway, yes, you are right, you need the add on otherwise you get an error. and indeed i best add a more meaningful description.