Posted: Fri Aug 14, 2020 10:43 am Post subject: ADC1 & xtiny (ATTINY3217)
ATtiny3217 has 2 ADCs (ADC0 and ADC1). In xtiny Bascom "Config ADC0" works and "Config ADC1" is not even recognized. How can I now configure ADC1 (I need to read voltage on pin 19 (ADC1/AIN8))?
"Getadc (n)" command now gives ADC0 value where "n" is from 0 to 11 (mux position). What is the syntax to read from desired pin 19 with ADC1?
P.S. "Getadc (100)" also compiles with no errors reported....I suppose this is not right isn't it?
you need to wait for the update. the first release only covers the hardware found in xtiny816.
multiple devices are not supported.
like i wrote on the add on page 'you can expect some updates'.
but the good news is that there will be an update for the add on in a few days. _________________ Mark
i got a long way in the mean time.
At the moment the dat files are updated.
And after that the help need to be updated for the timers. then its ready.
if you need it urgent you can write to support (make sure your email is the same as the one used for registration) and you get a beta when ready. _________________ Mark
Mark, thank you for great support. I have quite some work to do in the meantime. If I will be done before you release the update, then I will ask for beta, otherwise I will wait for the tested update.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum