Mega2560 R3 with ILI9341-TFT in 16-bit?

Kasch · Joined: 18 Jun 2005 Posts: 48

Hi, I would like to use a Mega2560 R3 Bord with shield and an 3,2 ILI9341-Display in 16bit. I have found the ILI9341-Libary from http://mat.midlight.eu/index.php/ILI9341_Library, but I can not change the port for parallel-versions-port, because only one port is possible.
But according to the datasheet of the mega2560 R3 are G.0 G.1 G.2 and D.7 connected with Reset, RW, CS and WR....what can I do? Thank you

bzijlstra · Posted: Sun Jan 29, 2017 1:39 pm Post subject: Search...

Start with a search in this forum. Plons did some work on SPI / 8-bit / 16 bit on ILI9341 displays.

Have fun
Ben Zijlstra

m_herr · Joined: 01 May 2005 Posts: 6

i have searched and found nothing from mega2560 AND ili9341...and from Ili9341 only spi-version in 2,2"

what you mean with your last sentence? clons don't work complete nothing?

bzijlstra · Posted: Tue Jan 31, 2017 12:46 am Post subject: Atmega2560 8-bit parallel

http://www.mcselec.com/index2.php?option=com_forum&Itemid=59&page=viewtopic&t=12893&postdays=0&postorder=asc&highlight=ili9341&start=0

Atmega2560 8-bit parallel with pictures

m_herr · Joined: 01 May 2005 Posts: 6

did you read my sentence? you quote my link, which I used and which the reason for THIS thread is...

bzijlstra

Have tried to answer the question of Kasch, the member that asked the initial question.

Have fun
Ben Zijlstra

m_herr · Joined: 01 May 2005 Posts: 6

no, you don't....he explaind his problem with software of a link..and you send the same link as answere..you have not read the question of threadstarter..pleas3 be carefully on your answere..have fun

bzijlstra · Posted: Wed Feb 01, 2017 1:14 am Post subject: Wrong link...

This is the link of the first item in this tread

http://mat.midlight.eu/index.php/ILI9341_Library,

Because of the comma I get a page without any contents.

After removing the comma I get indeed a very nice page with lots of information.
And you are right with a link to the page I have put in a answer.

So my 'fault'... or a wrong link. Solved. Good luck with your 'problem'.

Have fun
Ben Zijlstra

m_herr · Joined: 01 May 2005 Posts: 6

i repeat..again....you postet sincless the link which created the question of this thread...you can not post a solution-link which is the same link which just created the problem...nothing is solved..only you has not read the Main-question..again....good luck next time during reading and understanding...

Duval JP · Joined: 22 Jun 2004 Posts: 1162 Location: France

Once again! Before embarking on the purchase of equipment.
You should know if you have the skill to use it or if other users have already share their experiences.
The choice of display is very large here : http://www.mcselec.com/index2.php?option=com_forum&Itemid=59&page=viewtopic&t=13074

JP

albertsm · Joined: 09 Apr 2004 Posts: 5915 Location: Holland