bascom ==> arduino

sultanm9000 · Joined: 23 Aug 2014 Posts: 40

Hello,
"How do the connection (Arduino Atmega2560) with Bascom
Confused

:

(BASCOM-AVR version : 2.0.7.7 , Latest : 2.0.7.8 )

dabatek · Joined: 31 Jul 2013 Posts: 32 Location: Serbia

Hi !

On page 137 Bascom Avr PDF help...

But, in few steps:

First connect Arduino Atmega2560 with usb to your PC, than in Bascom menu OPTIONS chose Programmer, than chose: ARDUINO STK500V2,

proper COM port (in device manager can find which com is used for Arduino...) and for baud 115200...

work like normal programmer... Smile

Have a nice day.

Duval JP · Joined: 22 Jun 2004 Posts: 1161 Location: France

and here I write a step by step tutorial, look some other tips on Arduino in the forum index Bascom-Arduino

http://www.mcselec.com/index2.php?option=com_forum&Itemid=59&page=viewtopic&t=12472

It works fine on W7, W8.1, W10(32) and Win10(64)

JP
Wink

sultanm9000 · Joined: 23 Aug 2014 Posts: 40

What is the cause of this error please "? Crying or Very sad

bzijlstra · Posted: Thu Nov 26, 2015 12:52 am Post subject: Baudrate?

What board are you using?

What is the baudrate you are using?

Are you using a cable on the ISP connector or the bootloader?

Ben Zijlstra

sultanm9000 · Joined: 23 Aug 2014 Posts: 40

What board are you using? mega2560

What is the baudrate you are using? 9600 and 115200

Are you using a cable on the ISP connector or the bootloader?
Use USB cable

Thank you Ben Zijlstra

Paulvk · Joined: 28 Jul 2006 Posts: 1257 Location: SYDNEY

Have you loaded the driver for the M2560 onto your computer?

Regards Paul

Duval JP · Joined: 22 Jun 2004 Posts: 1161 Location: France

As I said in my tutorial

FIRST the 2560 arduino must be work with arduino compiler, here : https://www.arduino.cc/en/Main/Software then you must see the port used in the parameters of your computer.

if the small blink program gave in the sample arduino doesn't work, you can reload the driver from Arduino IDE

THEN and only if the steps above are working you can work with Bascom IDE

Did you follow it ?

Are you use to use the good serial port ? (in the picture the Arduino is not recognized.) then If you use the autoflash you must wait until bascom see your Arduino board

Please use the good forum for arduino question : http://www.mcselec.com/index2.php?option=com_forum&Itemid=59&page=viewforum&f=21

JP