Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

DDS AD9850 Controller for Arduino LCD Keypad Shield.

 
Post new topic   Reply to topic    www.mcselec.com Forum Index -> BASCOM-ARDUINO
View previous topic :: View next topic  
Author Message
O-Family

Bascom Expert



Joined: 23 May 2010
Posts: 320
Location: Japan

japan.gif
PostPosted: Fri Mar 13, 2020 8:13 am    Post subject: DDS AD9850 Controller for Arduino LCD Keypad Shield. Reply with quote

Analog Devices AD9850 is controlled by Arduino LCD Keypad Shield.
The frequency can be set in units of 0.1 Hz.
(There is an error because the resolution of DDS is about 0.0291Hz)
99 memories that can store frequency values.
If there is an error in the crystal oscillator of the reference clock [REFCLOCK], the output error will increase, so it can be calibrated in the program.

Circuit diagram
https://drive.google.com/open?id=10U4sUa9p335aCx6dbIsFtgErKVlQ-Zsj

Operate using the character LCD and key switch mounted on the “LCD Keypad Shield” board.
Move the setting cursor displayed at the bottom of the LCD to set the output item and frequency.
The operation method of the key switch is described in the following "Operation Manual".
https://drive.google.com/open?id=1HDPde3msHRSKAV8vAlpGJY3BZ42kbz9o
Back to top
View user's profile Visit poster's website
O-Family

Bascom Expert



Joined: 23 May 2010
Posts: 320
Location: Japan

japan.gif
PostPosted: Fri Mar 13, 2020 8:31 am    Post subject: DDS AD9851 Controller for Arduino LCD Keypad Shield. Reply with quote

Analog Devices AD9851 is controlled by Arduino LCD Keypad Shield.
The frequency can be set in units of 0.1 Hz.
(There is an error because the resolution of DDS is about 0.0419Hz)
99 memories that can store frequency values.
If there is an error in the crystal oscillator of the reference clock [REFCLOCK], the output error will increase, so it can be calibrated in the program.

Circuit diagram
https://drive.google.com/open?id=1ky3SJHm3-xxRSAszzpD47zRIwCKClsRZ

Operate using the character LCD and key switch mounted on the “LCD Keypad Shield” board.
Move the setting cursor displayed at the bottom of the LCD to set the output item and frequency.
The operation method of the key switch is described in the following "Operation Manual".
https://drive.google.com/open?id=17WvjFVk8p5ZdSGAbI6swx4zfyWolq4rw
Back to top
View user's profile Visit poster's website
albertsm

Administrator



Joined: 09 Apr 2004
Posts: 5921
Location: Holland

blank.gif
PostPosted: Fri Mar 13, 2020 12:25 pm    Post subject: Reply with quote

Hello O-Family,

That is a great collection of DDS controllers projects you are sharing.
And as usual great quality with all details.
I appreciate the fact that you took time to translate into English and publish it.

great job!

_________________
Mark
Back to top
View user's profile Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    www.mcselec.com Forum Index -> BASCOM-ARDUINO All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum