Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

2077 official release
Goto page 1, 2  Next
 
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    www.mcselec.com Forum Index -> BASCOM-AVR Archive
View previous topic :: View next topic  
Author Message
albertsm

Administrator



Joined: 09 Apr 2004
Posts: 5069
Location: Holland

blank.gif
PostPosted: Fri Jan 31, 2014 11:36 pm    Post subject: 2077 official release Reply with quote

After a lot of work, and later than planned, i can announce that version 2077 is available.
You can get it using the update wiz, or you can download a full setup.
As always, you can make a backup and/or install the software in it's own folder so you can have the old and the new version.

- The help file has categories for I2C, 1WIRE, etc. which should make it more clear.
- dat files for new chips have been added.
- there is a now support for USI and Xmega slave (the i2c slave add on has been updated as well)
- there is a new/alternative i2c master soft lib
- ######################### IMPORTANT ####################################
the crc32 function has been updated. it returned the crc in the wrong byte order. Now it returns it in the right order. BUT
this means you need to change your code. I left the old code in the mcs.lib so you could copy it in and put it in a new lib to maintain code compatibility
But it is best to update your code.
- spimove() has an optional parameter. it has been discussed in this forum
- the editor has a great feature (IMO) when code explorer is active you can get info about code elements like alias, variable and constants, etc. Just press SHIFT and hover the cursor over your code to see what i mean.
- the editor can also show indent lines for structures. it can be a nice visual help. it requires the code explorer to be visible and it is best to 'proper indent' your code.
These 2 options are not 100% optimal. But i did not want to hold it back since it is already useful.

Have fun!

(BASCOM-AVR version : 2.0.7.7 )

_________________
Mark
Back to top
View user's profile Visit poster's website
Madf

Bascom Member



Joined: 13 Nov 2011
Posts: 169
Location: Moscow

russia.gif
PostPosted: Sat Feb 01, 2014 7:38 am    Post subject: Reply with quote

Cool!!! Thank you.
Back to top
View user's profile Visit poster's website
Tiny

Bascom Member



Joined: 10 Nov 2010
Posts: 89
Location: The Netherlands

netherlands.gif
PostPosted: Sat Feb 01, 2014 9:13 am    Post subject: Reply with quote

Hi MArk,

Very nice, especially the indent for structures, Thanks
Back to top
View user's profile Visit poster's website
Robert_d1968

Bascom Member



Joined: 18 Dec 2012
Posts: 64
Location: China

usa.gif
PostPosted: Sat Feb 01, 2014 12:17 pm    Post subject: Reply with quote

Thank you very much,

I'm downloading it now, it looks very nice indeed...
Back to top
View user's profile Visit poster's website
PeterM

Bascom Member



Joined: 09 Jun 2008
Posts: 118

australia.gif
PostPosted: Sat Feb 01, 2014 1:15 pm    Post subject: Reply with quote

Mark

Excellent

_________________
Peter
Back to top
View user's profile
Plons

Bascom Member



Joined: 24 May 2005
Posts: 434
Location: Hilversum - The Netherlands

netherlands.gif
PostPosted: Sat Feb 01, 2014 2:52 pm    Post subject: Reply with quote

I love the indent with lines for structures, .... used to use Programmer's NotePad in case I needed overview.

Nice work Mark !

Nard

_________________
Bascom AVR ver 2.0.8.1
ProtectedParallelPortProgrammingDongle: http://www.aplomb.nl/TechStuff/PPPD/PPPD%20English.html
Dragon-lair: http://www.aplomb.nl/TechStuff/Dragon/Dragon.html
"leef met vlag en wimpel, maar hou het simpel"
Back to top
View user's profile
nicofer

Bascom Member



Joined: 01 May 2013
Posts: 83
Location: GRJ

southafrica.gif
PostPosted: Mon Feb 03, 2014 3:38 pm    Post subject: Reply with quote

Bascom Rocks !!

Baie goed !
Nico
Back to top
View user's profile
nicofer

Bascom Member



Joined: 01 May 2013
Posts: 83
Location: GRJ

southafrica.gif
PostPosted: Thu Feb 06, 2014 2:32 pm    Post subject: Indent Reply with quote

Hi

After testing it a bit I have one function on my wishlist .

A text block select option .

Not the complete line but only the chars in a selected block , not the text to the end of a line and from beginning of the next line , this will help a lot to move selected text .

K-Edit , crimson editor , and Notepad++ has this function but can not use it with Bascom .

Please check the link http://notepad-plus-plus.org/features/column-mode-editing.html

Kind regards

Nico
Back to top
View user's profile
albertsm

Administrator



Joined: 09 Apr 2004
Posts: 5069
Location: Holland

blank.gif
PostPosted: Tue Feb 11, 2014 10:50 pm    Post subject: Reply with quote

have a look at the next update.
_________________
Mark
Back to top
View user's profile Visit poster's website
astroschmidt

Bascom Member



Joined: 04 Sep 2010
Posts: 33

blank.gif
PostPosted: Sat Feb 22, 2014 12:52 pm    Post subject: Reply with quote

The indent lines and the "code explorer" are really great enhancements.

Thanks Mark for the new functions.

What would be a great enhancement for a future versions would be tabs for each sub or label (like the tabs in Firefox).

If e.g. you want to follow a variable that is used all over the program it would ease the workflow a lot if you simply jump from tab to tab instead of scrolling through a long program.

Roger
Back to top
View user's profile
Duval JP

Bascom Member



Joined: 22 Jun 2004
Posts: 938
Location: France

france.gif
PostPosted: Sat Feb 22, 2014 5:11 pm    Post subject: Reply with quote

but where is the version I used for my first program ? Smile

Bascom is better and better !
"Merci beaucoup" Mark for all your works
Back to top
View user's profile Visit poster's website
bzijlstra

Bascom Ambassador



Joined: 30 Dec 2004
Posts: 1179
Location: Tilburg - Netherlands

netherlands.gif
PostPosted: Sun Feb 23, 2014 6:08 am    Post subject: Excelent job!! Reply with quote

Mark did an excelent job.



Love this new Shift-function.

Have fun
Ben Zijlstra
Back to top
View user's profile Visit poster's website
albertsm

Administrator



Joined: 09 Apr 2004
Posts: 5069
Location: Holland

blank.gif
PostPosted: Mon Mar 03, 2014 10:58 am    Post subject: Reply with quote

astroschmidt wrote:
The indent lines and the "code explorer" are really great enhancements.
What would be a great enhancement for a future versions would be tabs for each sub or label (like the tabs in Firefox).
If e.g. you want to follow a variable that is used all over the program it would ease the workflow a lot if you simply jump from tab to tab instead of scrolling through a long program.
Roger


you might want to try the 'Find Refrences' function from the Code explorer. select a variable, then click right mouse and select 'Find references'. It will give a list under the variable of instances where the variable is referenced.

_________________
Mark
Back to top
View user's profile Visit poster's website
Neill

Bascom Member



Joined: 08 Dec 2008
Posts: 47

newzealand.gif
PostPosted: Wed Apr 09, 2014 2:03 am    Post subject: Reply with quote

Shout out to Mr Mark Alberts.

Thanks for the new features!!

Yesterday was the first time I got to use 2077 for a few hours.

I really appreciate the indent and explorer features. Certainly saves time and makes it easier to program.

BASCOM, Just gets better and better.
Back to top
View user's profile
njepsen

Bascom Member



Joined: 13 Aug 2007
Posts: 412

newzealand.gif
PostPosted: Thu Apr 17, 2014 6:10 am    Post subject: Reply with quote

Quote:
the editor can also show indent lines for structures. it can be a nice visual help. it requires the code explorer to be visible and it is best to 'proper indent' yo



How do you get this to work?

_________________
Neil
Back to top
View user's profile
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.    www.mcselec.com Forum Index -> BASCOM-AVR Archive All times are GMT + 1 Hour
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum