View previous topic :: View next topic |
Author |
Message |
Ferdz-Dandy
Joined: 20 Jul 2017 Posts: 2
|
Posted: Thu Jul 20, 2017 8:31 pm Post subject: DR100W conCEPT Project with BASCOM 8051 Programming |
|
|
Hello Everyone - I am sharing my project, a shareware and courseware to Learn (a) Hardware (b) Programming with BASCOM 8051 and (c) Modular Board Integrations.
I used Audio as the hardware,
one reason is that, I love music, and I programmed the 8051 core controller with BASCOM registered version. I attempted to use AVR using ATmega8515 (AT90S8515) as it is pin compatible with 8051, but I am halfway of it, the controller can use 8051 and AVR (ATmega8515).
I shared it here because I wanted to make a better Learning Platform, an upgrade as DR100W concEPT II
(1) Hardware using real digital Equalizer and Tone control, Touch Screen LCD
(2) Better Programming technique + some graphics or display sine wave or real music waveform
and, looking forward with the help of BASCOM community to
(3) Continue the DR100W conCEPT Automatic Test Equipment (ATE) -- a 24/7 system that will check the project and possibly to add
IoT functionality with ESP8266 so I can monitor the parameters over the net when I am not at home (dreaming for now)
first, see the videos introduction of the control module which is programmable by BASCOM 8051 -- I am using a standard 8051 from STC
https://www.youtube.com/watch?v=Yptbk9mxq54&list=PLa_Y0kApoboSfrw0Acn91Aw0DKmFvX82p
and this one here is the working program driving a hybrid analog + digital tone control/preset Equalizer
https://www.youtube.com/watch?v=C99E7R-QqLI
Thanks to all ! _________________ Ferdz-Dandy |
|
Back to top |
|
|
Ferdz-Dandy
Joined: 20 Jul 2017 Posts: 2
|
Posted: Fri Jul 21, 2017 11:51 am Post subject: |
|
|
the simplified block diagram of the DR100W conCEPT Project.
if not clear, get the PDF :
There are 5 modules :
1. DR100W_CM : Controller runs by a uC (AVR or 8051 core), diy made
2. DR100W_EQ : Equalizer and Tone Control, diy made
3. DR100W_PA : Class-D power amplifier, diy made
4. DR100W_SMPS : split SMPS Power Supply, (prefer to buy a complete and fully working module........ but it cna be diy, just need more equipment
for safety reason)....... and,
5. Remote Controller : RF controller (standard market controller)
The Hardware that is programmable by BASCOM is the DR100W_CM, more info on this video
https://www.youtube.com/watch?v=U6yyyockrCs&t=186s
It is this module that, I would like to changed its form factor,
1. with Touch screen colored LCD
2. adding temperature sensors to monitor heatsink temperature
3. other stuffs that make a good front panel amplifier ( can be used also as general display).
and, I still love 8051 core -- but this time will use a high speed 8051 core or called 1T8051 (the current project used the legacy 8051), with ADC. _________________ Ferdz-Dandy |
|
Back to top |
|
|
albertsm
Joined: 09 Apr 2004 Posts: 5914 Location: Holland
|
Posted: Thu Jul 27, 2017 9:48 am Post subject: |
|
|
Hello Dandy
Thanks for sharing your work here, And also thanks for the videos. It was nice to see the introduction and to see you and where you live.
I will follow your project and help with the DAT files and/or possible changes in bascom-8051 _________________ Mark |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|