programming the DigiSpark with BASCOM

MJB · Joined: 09 Jul 2006 Posts: 18

just saw the DigiSpark modules 5 for 12.69 €.

can those be programmed with BASCOM just using the Arduino programming mode?

Anyboy experience with the DigiSpark?

I don't want to go to the ArduinoIDE Wink

thanks MJB

(BASCOM-AVR version : 2.0.7.8 )

albertsm · Joined: 09 Apr 2004 Posts: 5916 Location: Holland

when it has the arduino v1 or v2 bootloader (stk500 v1 or stk500v2) loader it should work. just ask the vendor for information on the used bootloader.

MJB · Joined: 09 Jul 2006 Posts: 18

Thanks Mark,

this is what I found so far.
Maybe you know it.

https://github.com/micronucleus/micronucleus

http://www.instructables.com/id/Digispark-DIY-The-smallest-USB-Arduino/

This DigiSpark with BASCOM would be great for little creating 'things'.

albertsm · Joined: 09 Apr 2004 Posts: 5916 Location: Holland

it seems they use a piece of the usbasp protocol. i do not think they support to read the device id. and they use a different usb id.
this means that it is not the normal arduino protocol. but a simplified usbasp protocol.
if you send a device i can add it. maybe they use a different pid for each micro, i did not check that.
of course you can also use their command line loader and use bascom external programmer.