View previous topic :: View next topic |
Author |
Message |
marc3
Joined: 09 Dec 2014 Posts: 14
|
Posted: Tue Jan 13, 2015 4:46 pm Post subject: bascom end ardunoisp |
|
|
Dear Members,
I am using bascom 2.0.7.5 on windows xp home end a arduino_uno board, no problem.
Now i wanted to use a arduino_isp programmer ( not the uno ) to program the ATtiny's.
afther installing the driver ( libusb device ), i can't make it working, by chosing progammer end parameter settings.
Can someone explain to me what exactly ineed to set.
Thank you |
|
Back to top |
|
|
bzijlstra
Joined: 30 Dec 2004 Posts: 1179 Location: Tilburg - Netherlands
|
Posted: Tue Jan 13, 2015 5:37 pm Post subject: arduino_isp |
|
|
Googled for this device. http://arduino.cc/en/Main/ArduinoISP
Is this the hardware you are using?
I see some Windows drivers on this page. Did you install that?
In your hardware device list do you see any new device?
Did you do a test from within the Arduino IDE?
Burning a bootloader...
Ben Zijlstra |
|
Back to top |
|
|
marc3
Joined: 09 Dec 2014 Posts: 14
|
Posted: Tue Jan 13, 2015 10:32 pm Post subject: |
|
|
Yes that's the hardware i use.
the right windows driver is installed.
In my hardware list i see the new device: libusb device arduino isp.
I haded to install the arduino IDE version: 1.5.8 ( 1.5.7 is mininum requerd )
i didn't try to burn a bootloader on the uno (m328Pdef ), but i tryed to load a simple skeths, notting haped. |
|
Back to top |
|
|
albertsm
Joined: 09 Apr 2004 Posts: 5913 Location: Holland
|
Posted: Tue Jan 13, 2015 11:01 pm Post subject: |
|
|
This seems more arduino related than bascom. This forum is for using bascom with arduino hardware. _________________ Mark |
|
Back to top |
|
|
bzijlstra
Joined: 30 Dec 2004 Posts: 1179 Location: Tilburg - Netherlands
|
Posted: Tue Jan 13, 2015 11:07 pm Post subject: arduino_isp |
|
|
In the Arduino-IDE I consider you have chosen the right board and if possible the right programmer. In red you will see all kinds of errors when things go wrong. Do you have any errors? It is in the bottom screen.
Have you tried any usb programmer options in Bascom-AVR?
Ben Zijlstra |
|
Back to top |
|
|
|