Posted: Sun Apr 07, 2013 3:43 pm Post subject: BootLoader with NM7010
Welcome.
I have a question about NM7010A Wiznet module. I have several of them and I wanted to do (based on them) LAN BootLoader. However, the statement
TCPIP Config in the BootLoader section of ATmega644P does not execute. Perhaps because it is necessary to start interrupts (INT0 or INT1). I know that in the help file in the $Loader is clearly written that the BootLoader can not use interrupts, but only because the upload will overwrite interrupt vector on the begining of flash. However, an interrupt vector can be loaded to BootLoader section (which I did by putting the specified bit in a register MCUCR). But it still do not work. Please Mark for help me and explain.I use Bascom 2.0.7.6
Best regards.
in the next release i added $bootvector which will include the vector table. it will require more space. and you need to set the IVSEL bit yourself before using the interrupts. And : your normal program should reset the bit. _________________ Mark
Posted: Sat Apr 27, 2013 3:31 pm Post subject: LAN BootLoader
Welcome.
Thank you for your reply. As I have several of these modules (NM7010) and ready the device cooperating with them. BootLoader have been captured on the module WIZ810MJ but the possibility of software upgrade via LAN using NM7010A is very useful to me. And the question. When you plan the next version (not yet had time to register my copy of Bascom)?
Regards
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
FAQ
Search
Register
Log in
