Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Data exchange between PC and EASY TCP/IP

 
Post new topic   Reply to topic    www.mcselec.com Forum Index -> EASY TCP/IP
View previous topic :: View next topic  
Author Message
Arera

Bascom Member



Joined: 23 Sep 2007
Posts: 386
Location: Wuppertal, Germany

germany.gif
PostPosted: Tue Oct 09, 2007 9:01 pm    Post subject: Data exchange between PC and EASY TCP/IP Reply with quote

Hi everyone!
Iīm at the very beginning with my EASY TCP/IP experiances.
In fact, the board isnīt soldered yet...
But Iīm impatient!

There one aspect, I do not really understad:

How will I exchange data between my PC and the EASY TCP/IP Module?

I imagine something similar to Hyperterminal (for RS232):
Establish a connection, then send and receive data.

Can I use Telnet?
Do I really need VB-Web servers and clients? Shocked

Thanks for any hints, tipps and ideas!
Marc
Back to top
View user's profile
bzijlstra

Bascom Ambassador



Joined: 30 Dec 2004
Posts: 1179
Location: Tilburg - Netherlands

netherlands.gif
PostPosted: Wed Oct 10, 2007 11:26 am    Post subject: UDP... Reply with quote

Check UDP

With an acknowledge from the receiver it can be very good.

Ben Zijlstra
Back to top
View user's profile Visit poster's website
Arera

Bascom Member



Joined: 23 Sep 2007
Posts: 386
Location: Wuppertal, Germany

germany.gif
PostPosted: Wed Oct 10, 2007 12:12 pm    Post subject: Reply with quote

Yes, I read about the the differences between UDP an TCP.
But my question is on a "lower level":

What programm do I use on my PC to UDP-connetct to the EASY TCP/IP module? Confused
Back to top
View user's profile
bzijlstra

Bascom Ambassador



Joined: 30 Dec 2004
Posts: 1179
Location: Tilburg - Netherlands

netherlands.gif
PostPosted: Wed Oct 10, 2007 8:53 pm    Post subject: EDTP Internet Test Panel... Reply with quote

There is a UDP-client you can use. It is called the EDTP Internet test panel and the source in Visual Basic 6.0 can be downloaded from www.edtp.com

http://www.edtp.com/download/testpnl/testpanel_cur.zip

It uses PORT 7 to do a echo of the received characters and it uses PORT 5000 to do some one-way action.

Have fun
Ben Zijlstra
Back to top
View user's profile Visit poster's website
Arera

Bascom Member



Joined: 23 Sep 2007
Posts: 386
Location: Wuppertal, Germany

germany.gif
PostPosted: Thu Oct 11, 2007 7:28 am    Post subject: Reply with quote

That means (at least to me...) data exchange between PC an EasyTcpIp is not THAT easy Rolling Eyes

Thank you Ben for the links, but I need an .exe!
I donīt know anything about VB Embarassed

I expected it to be as easy as RS232 via Hyperterminal.

Am I right so far?

Thanx, Marc
Back to top
View user's profile
bzijlstra

Bascom Ambassador



Joined: 30 Dec 2004
Posts: 1179
Location: Tilburg - Netherlands

netherlands.gif
PostPosted: Thu Oct 11, 2007 8:41 am    Post subject: EXE can be found here Reply with quote

I compiled the Visual Basic source and the source + EXE file can be downloaded at http://members.home.nl/bzijlstra/software/communication/testpanel_cur.zip

After starting the EXE you can change the IP-number.

Give it a try
Ben Zijlstra


Last edited by bzijlstra on Fri Oct 12, 2007 9:57 am; edited 1 time in total
Back to top
View user's profile Visit poster's website
Arera

Bascom Member



Joined: 23 Sep 2007
Posts: 386
Location: Wuppertal, Germany

germany.gif
PostPosted: Thu Oct 11, 2007 3:38 pm    Post subject: Reply with quote

Sounds good to me.
But the link doesnīt work.
Could you please check it?

Thanks a lot for your help!
Marc
Back to top
View user's profile
bzijlstra

Bascom Ambassador



Joined: 30 Dec 2004
Posts: 1179
Location: Tilburg - Netherlands

netherlands.gif
PostPosted: Thu Oct 11, 2007 4:49 pm    Post subject: Reply with quote

Ssssorry, my fault...

http://members.home.nl/bzijlstra/software/communication/testpanel_cur.zip

There was a S after communication that shouldn't be there.

Ssssssssssssssssssssilly me
Ben Zijlstra
Back to top
View user's profile Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    www.mcselec.com Forum Index -> EASY TCP/IP All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum