Search found 112 matches

I know that Proteus is for such purpose but for my needs it is too extensive. I've searched something similar but simpler (in my opinion) and recently I've found this simulation software https://www.s ...

Hi,
since I have owned a photovoltaic system for some time, I decided to add my three cents. I now want to buy a heat buffer with a built-in electric heater. My concern was that when the heater star ...

Hi,
I have no idea what value is set then and it is even hardly to check but project is not "time critical" so whatever is set seems to be ok in my case, so far Smile

The issue is well known (although first time I encountered it using watchdog). So in short it seems that it is needed to burn different (the best from Uno) bootloader. It seems not hard, many tuts ho ...

Hi,

there is a simple code

'$sim
$regfile = "m328pdef.dat"
$crystal = 16000000
$baud = 9600
$hwstack = 32
$swstack = 16
$framesize = 32

Config Int0 = Low Level
Config Watchd ...

MWS, thanks for clarification.

Hello,

you are right MWS, my bad. It should be 4 bytes hex..
Simply saying I try this 4 hex bytes to convert according to Big Endian into Single type.
For example this string "4368B333" shou ...

I've found good explanation how to deal with this problem:

Let's find the decimal value of the first hexadecimal number from the data above: 4367F3DD. We'll start by converting it into binary and l ...

Hello,

I'm working with some device in Modbus TCP and I get response from this device as 8 hex bytes and need to convert into single type value. I found some solution but it seems to convert 8byt ...

Glad it works. Mine is already built into a bigger device so I'm unable to make any changes and somehow I don't see possibility to buy new ones, at least in Poland.

OK, I've found it. It is simplified version, original one handles additionally impulsator but in standard way, so I removed it from this source in order to make it more understandable. It compiles, bu ...

Hi, i try to find my code and tomorrow send.

Impressive, congrats Smile

Hi,
working with xmega32e5, Bascom 2.0.8.5 IDE ver 002, i try to write
on porta_int0 enkoder
on porta_int1 enkoder
enable porta_int0, lo
enable porta_int1, lo
Enable Interrupts but during comp ...

sadly true
Setting this bit enables rotary filter. This bit is available only for CH0CTRL page 90. yes, hope dies the last Wink

Thanks for pointing this out
Regards,
Martin