Author |
Message |
Topic: Low Power Sleep Project |
O-Family
Replies: 6
Views: 589
|
Forum: BASCOM-AVR Posted: Sat May 20, 2017 12:09 am Subject: Low Power Sleep Project |
No,
Please check the datasheet again.
Even in the power down mode, the pin change interrupt is activated.
--------------------------------------------------------------------
7.1.3 Power-down Mo ... |
Topic: Low Power Sleep Project |
O-Family
Replies: 6
Views: 589
|
Forum: BASCOM-AVR Posted: Fri May 19, 2017 12:52 am Subject: Low Power Sleep Project |
Interesting. This may be a good start. Since I can't read Japanese can you please tell me what the components are which are
represented by a rectangle with a circle inside hooked to PB2?
This is a v ... |
Topic: Low Power Sleep Project |
O-Family
Replies: 6
Views: 589
|
Forum: BASCOM-AVR Posted: Thu May 18, 2017 11:38 pm Subject: Low Power Sleep Project |
Hi,
I have a project close to your wishes.
If you can use BASCOM, you can remodel this and achieve your purpose.
Unfortunately, the document is in Japanese.
Video.
https://www.youtube.com/watch?v ... |
Topic: Atmel-ICE Porgrammer |
O-Family
Replies: 11
Views: 2843
|
Forum: BASCOM-AVR Posted: Wed May 17, 2017 1:10 am Subject: Atmel-ICE Porgrammer |
Hi,
Programmer [AVRISPmkII] seems to be discontinued.
The successor is [Atmel - ICE], but writing from the command line is hard to use.
I hope for BASCOM's IDE urgently! |
Topic: BME280 sensor |
O-Family
Replies: 21
Views: 31285
|
Forum: Share your working BASCOM-AVR code here Posted: Fri Mar 17, 2017 11:35 am Subject: BME280 sensor |
Thanks for the fix!
There was a difference of 0.2% humidity with my routine, but it was consistent after the correction.
Because your routine is concise, I will adopt it as well.
Thank you for yo ... |
Topic: BME280 sensor |
O-Family
Replies: 21
Views: 31285
|
Forum: Share your working BASCOM-AVR code here Posted: Thu Mar 16, 2017 11:15 am Subject: BME280 sensor |
Hi Mrshilov,
The procedure for converting formulas from your C language is wonderful!
please tell me.
Conversion of humidity coefficient is not wrong?
Register 0xE5 is 0xE5 Temp(1) = & ... |
Topic: 1 day delay |
O-Family
Replies: 7
Views: 4584
|
Forum: BASCOM-ARDUINO Posted: Sun Feb 26, 2017 3:06 pm Subject: 1 day delay |
If Timer0 or Timer2 is not used, 1 second can be created even with 8bit timer.
And it is possible to count it 24 hours.
Dim T8msec As Byte
Config Portb.5 = Output
Config Timer2 = Timer ... |
Topic: All-in-one game board "Gamebuino" |
O-Family
Replies: 3
Views: 3467
|
Forum: Share your working BASCOM-AVR code here Posted: Sat Feb 18, 2017 1:26 pm Subject: All-in-one game board "Gamebuino" |
Additional Information
You can start the user's program written to the micro SD card without using ISP programmer or USB cable.
Write the HEX file of the program to the micro SD card, the boot loa ... |
Topic: All-in-one game board "Gamebuino" |
O-Family
Replies: 3
Views: 3467
|
Forum: Share your working BASCOM-AVR code here Posted: Tue Feb 14, 2017 7:02 am Subject: All-in-one game board "Gamebuino" |
I got an all-in-one game board "Gamebuino"!
It has seven push buttons, G-LCD display, speaker, photosensor, I2C interface, serial communication, SD card and battery on board.
AVR is ATmega328P-AU 16 ... |
Topic: L6470 Microstepping motor driver |
O-Family
Replies: 1
Views: 2400
|
Forum: Share your working BASCOM-AVR code here Posted: Tue Jan 24, 2017 1:39 am Subject: L6470 Microstepping motor driver |
Command subroutine of controller L6470 to move stepper motors.
Application commands of L6470 can be described by BASCOM grammar.
Video
Https://youtu.be/4NqZ5h4CP_s
Japanese site
Http://www.ne ... |
Topic: TeraTerm ANSWERBACK |
O-Family
Replies: 3
Views: 495
|
Forum: BASCOM-AVR Posted: Mon Jan 23, 2017 2:06 am Subject: TeraTerm ANSWERBACK |
The transmission of
Print Chr(&H05); 'Send [ENQ].
[Setup] -> [Terminal] -> [Answerback] |
Topic: Tiny45 Timer1 |
O-Family
Replies: 9
Views: 812
|
Forum: BASCOM-AVR Posted: Fri Jan 20, 2017 3:50 am Subject: Tiny45 Timer1 |
It is a modification of your program.
So it should work on your chip and you should get 10Hz.
For Timer1 of Tiny45, OCR1C acts as a frequency divider. (Clear Timer = 1)
However, OCR1C has no exte ... |
Topic: Tiny45 Timer1 |
O-Family
Replies: 9
Views: 812
|
Forum: BASCOM-AVR Posted: Fri Jan 20, 2017 1:17 am Subject: Tiny45 Timer1 |
In many varieties of Tiny chips, the timers are different from the Mega chips in configuration.
The special timer of each Tiny chip does not work with BASCOM standard instructions.
Please understand ... |
Topic: Atmega1284p rxd0 100pf capacitor required? |
O-Family
Replies: 8
Views: 483
|
Forum: BASCOM-AVR Posted: Sat Jan 14, 2017 9:46 am Subject: Atmega1284p rxd0 100pf capacitor required? |
Hi
A full swing oscillator can be selected with a fuse bit. (See data sheet)
If the fuse bit is set to a low power oscillator or low frequency crystal oscillator, AVR keeps the voltage of the osci ... |
Topic: Atmega1284p rxd0 100pf capacitor required? |
O-Family
Replies: 8
Views: 483
|
Forum: BASCOM-AVR Posted: Sat Jan 14, 2017 7:58 am Subject: Atmega1284p rxd0 100pf capacitor required? |
In the case of 1284P, the XTAL1 pin and the RXD0 pin are next to each other, and when the system clock is set to the low power oscillator, crosstalk occurs inside the chip, which may affect the freque ... |
|