Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Search found 1923 matches
www.mcselec.com Forum Index
Author Message
  Topic: EEPROM 93C HELP
kimmi

Replies: 31
Views: 2339

PostForum: BASCOM-AVR   Posted: Thu Feb 02, 2017 3:52 pm   Subject: EEPROM 93C HELP
Hi,
here is a test setup
!!!did not test it on real hardware !!!
but maby you can use some of it and read the datasheet !

'(
'$sim
http://www.atmel.com/Images/doc5140.pdf
AT93C46 ...
  Topic: EEPROM 93C HELP
kimmi

Replies: 31
Views: 2339

PostForum: BASCOM-AVR   Posted: Thu Feb 02, 2017 12:52 pm   Subject: EEPROM 93C HELP
Hi

Wy dont you just use shiftout / shiftin
93c46 is 1K: 128 x 8 or 64 x 16

for 8bit read/write :
so for read shiftout 9 bits Instruction (read 3 bits 110) (address 6 bits) read + addres ...
  Topic: Analog clock SSD1289 3.2" 240x320 Test
kimmi

Replies: 9
Views: 3271

PostForum: Share your working BASCOM-AVR code here   Posted: Wed Feb 01, 2017 7:44 pm   Subject: Analog clock SSD1289 3.2" 240x320 Test
Hi JP,

I have not seen xmega256 as shield yet (i don't like Arduino)

but a quick search on the net you find some good boards (alvidi atxmega)
  Topic: Analog clock SSD1289 3.2" 240x320 Test
kimmi

Replies: 9
Views: 3271

PostForum: Share your working BASCOM-AVR code here   Posted: Tue Jan 31, 2017 5:21 pm   Subject: Analog clock SSD1289 3.2" 240x320 Test
Here is a test code for an Analog clock on SSD1289 3.2" 240x320 lcd

This is just a test code
It can be improved

small video [url=http://www.royalsystems.dk/clock/aclock.mp4]here
  Topic: DHT22/AM2302
kimmi

Replies: 3
Views: 2406

PostForum: BASCOM-AVR   Posted: Tue Jan 31, 2017 4:28 am   Subject: DHT22/AM2302
http://www.mcselec.com/index2.php?option=com_forum&Itemid=59&page=viewtopic&t=12921&highlight=dht22
  Topic: Serial Port (Atmega8)
kimmi

Replies: 15
Views: 927

PostForum: BASCOM-AVR   Posted: Tue Jan 31, 2017 2:32 am   Subject: Serial Port (Atmega8)
Print "WHAT YOUR CMD IS HERE" ;

try Print "5"
  Topic: Serial Port (Atmega8)
kimmi

Replies: 15
Views: 927

PostForum: BASCOM-AVR   Posted: Mon Jan 30, 2017 2:38 pm   Subject: Serial Port (Atmega8)
$regfile = "m8Adef.dat"
$crystal = 4000000
$hwstack = 32
$swstack = 32
$framesize = 32
$baud = 9600

Led_sent Alias Portd.2
Config Led_sent = Output

Led_1 Alias Portd.3
Config Le ...
  Topic: Need Help (AT90CAN32)
kimmi

Replies: 19
Views: 1267

PostForum: BASCOM-AVR   Posted: Thu Jan 19, 2017 10:54 pm   Subject: Need Help (AT90CAN32)
hi
I have not try CAN yet but you can't use Cansend() as a sub name its a CMD ( it's blue)

Try use the forum search function, search for : canbus
  Topic: Variable problem with interupt
kimmi

Replies: 6
Views: 437

PostForum: BASCOM-AVR   Posted: Wed Jan 11, 2017 11:31 pm   Subject: Variable problem with interupt
Did you config timer0 right ?
you need time to do spiout !

Config Timer0 = Timer , Prescale = 1
$crystal = 14745600
' Prescale = 1 overflow at 0.01736ms
'~~~~
' Prescale = 1024 overflow at 17 ...
  Topic: Variable problem with interupt
kimmi

Replies: 6
Views: 437

PostForum: BASCOM-AVR   Posted: Wed Jan 11, 2017 10:49 pm   Subject: Variable problem with interupt
@AIVA
- please use the code tags when posting code.

missing Dim for K0 P5 V1 ect check your code "VAR" again
  Topic: IDE error
kimmi

Replies: 7
Views: 712

PostForum: BASCOM-AVR   Posted: Wed Dec 28, 2016 3:32 am   Subject: IDE error
here are new features.
- edit show excluded code
- edit show dead code
you could turn it off.

One of the other ways is :
Top Menu select "Edit"
check if "Show Excluded Code" is disabled !!
  Topic: IDE error
kimmi

Replies: 7
Views: 712

PostForum: BASCOM-AVR   Posted: Tue Dec 27, 2016 12:30 am   Subject: IDE error
Did you try what Mark say ? :

it might be the used font, or the font mode since there is a new option to 'use monofont'.
http://www.royalsystems.dk//Bascom/ba.png

Allso if you dont have a print ...
  Topic: Read SHTC1 with CRC
kimmi

Replies: 34
Views: 1525

PostForum: BASCOM-AVR   Posted: Wed Dec 21, 2016 12:48 am   Subject: Read SHTC1 with CRC
Hi, Nice to see you got it working now Smile

your crc only check Temperature not Humidity

here is a test for both :
$regfile = "m328pdef.dat"
$crystal = 16000000
$hwstack = 40
$swstac ...
  Topic: Read SHTC1 with CRC
kimmi

Replies: 34
Views: 1525

PostForum: BASCOM-AVR   Posted: Sun Dec 18, 2016 2:09 am   Subject: Read SHTC1 with CRC
You must check if the module have pullup at SCL SDA pins then you don't need to add the ext pullups !!!

And Read the datasheet page 8 you need ACK / NACK cmds
  Topic: Read SHTC1 with CRC
kimmi

Replies: 34
Views: 1525

PostForum: BASCOM-AVR   Posted: Sun Dec 18, 2016 1:45 am   Subject: Read SHTC1 with CRC
&B11100000 I2C write
&B11100001 I2C read
 
Page 3 of 129 Goto page Previous  1, 2, 3, 4 ... 127, 128, 129  Next
All times are GMT + 1 Hour
Jump to: