Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Search found 5201 matches
www.mcselec.com Forum Index
Author Message
  Topic: Hyperterminal Hangs?
albertsm

Replies: 6
Views: 2804

PostForum: Various   Posted: Sun Sep 19, 2004 2:13 am   Subject: Hyperterminal Hangs?
When the BASCOM terminal emulator does work, i can create a stand alone terminal emulator when you can not find another one.
  Topic: Attachments added
albertsm

Replies: 1
Views: 1734

PostForum: Various   Posted: Sat Sep 18, 2004 9:49 pm   Subject: Attachments added
Hi All,

Now you can addd attachments.
When downloading attachements, make sure you check for virusses as there are always sad people.
  Topic: This forum seems dead to me.
albertsm

Replies: 2
Views: 1878

PostForum: Various   Posted: Wed Sep 15, 2004 10:28 pm   Subject: This forum seems dead to me.
Hi,

Yes, everything needs time. For what it is worth, in the near future i will put all my support effort in this forum. This means that questions will be answered only here(by me) and of course by ...
  Topic: Sending 16Bit serial Data
albertsm

Replies: 9
Views: 3013

PostForum: BASCOM-AVR Archive   Posted: Tue Sep 14, 2004 9:54 pm   Subject: Sending 16Bit serial Data
Yes, that explains it well. But to make sure here is some more info.
When we have a variable named B, and it is of the type BYTE, it can hold values from 0-255.
Ok, let say we assign it value of 16 ...
  Topic: ATiny15 problems ...
albertsm

Replies: 7
Views: 2191

PostForum: BASCOM-AVR Archive   Posted: Tue Aug 31, 2004 10:23 pm   Subject: ATiny15 problems ...
Hi

In version 1.11.7.4 waitms uses SBIW that is not supported in the tiny15. In the next beta , other asm is ued so waitms will worik with the tiny15.
But tiny15 is best to be programmed with asm.
  Topic: port bin set and reset or cbi sbi in asm without config port
albertsm

Replies: 3
Views: 1387

PostForum: BASCOM-AVR Archive   Posted: Tue Aug 31, 2004 10:20 pm   Subject: port bin set and reset or cbi sbi in asm without config port
Hi

You can also use :
DDRD= &B1111_1110 ' only make pin 0 a input
Or :

config portd = &B11111110

i advise to use basic as on some ports, cbi will NOT work and the compiler will han ...
  Topic: Chip compatability list? (ATTINY2313)
albertsm

Replies: 3
Views: 1481

PostForum: BASCOM-AVR Archive   Posted: Tue Aug 31, 2004 10:16 pm   Subject: Chip compatability list? (ATTINY2313)
Hi,

The tiny2313 is supported in the next beta(1.11.7.5).
This beta is now under test and will be made public in september.

This 1.11.7.5 beta has support for tiny13 and a bunch of other new av ...
  Topic: Libary in Bascom-avr
albertsm

Replies: 3
Views: 1775

PostForum: BASCOM-AVR Archive   Posted: Tue Aug 31, 2004 10:14 pm   Subject: Libary in Bascom-avr
Hi,

A library is not a simple snippet of AVR asm.
It just is the equivalent of a SUB/FUNCTION that is called by the compiler depending on the statements you use.

Have a look at the libdemo.bas ...
  Topic: Stack Pointer and Softwarestack overlap
albertsm

Replies: 6
Views: 2415

PostForum: BASCOM-AVR Archive   Posted: Tue Aug 31, 2004 10:09 pm   Subject: Stack Pointer and Softwarestack overlap
You need to increase the HW stack when using interrupts without the NOSAVE option. Notice NOSAVE is only for people that know what they do/change inside the ISR !!!
When you have a lot of nested GOSU ...
  Topic: How to use Getrc5 and monitor port buttons same time?
albertsm

Replies: 3
Views: 1493

PostForum: BASCOM-AVR Archive   Posted: Tue Aug 31, 2004 10:05 pm   Subject: How to use Getrc5 and monitor port buttons same time?
Hi,

When you enter an ISR in AVR, the global interrupts are disabled.
This means you need to re-enable them, or better , only the interrupt you want to keep tickining like the timer interrupt that ...
  Topic: Problem with Kansa stk200 board and LCD
albertsm

Replies: 9
Views: 2053

PostForum: BASCOM-AVR Archive   Posted: Tue Aug 31, 2004 9:57 pm   Subject: Problem with Kansa stk200 board and LCD
Hi,

Did you tried the lcd.bas sample?
I used it to test LCD in 4 bit pin mode and in BUS mode.
For the bus mode you need to select the Options, Compiler, external memory access.
  Topic: SD MMC CARDS
albertsm

Replies: 4
Views: 3241

PostForum: AVR-DOS   Posted: Tue Aug 03, 2004 11:00 pm   Subject: SD MMC CARDS
Hi,

I have used them in a project with AVR-DOS.
Works perfect. But SD is slower then CF.
  Topic: Sending ASCII with RS232
albertsm

Replies: 1
Views: 1428

PostForum: BASCOM-AVR Archive   Posted: Tue Aug 03, 2004 10:58 pm   Subject: Sending ASCII with RS232
Can you make a logging with the terminal emulator and post it here?

further you use OPEN but that is not needed when you use the HW UART.
I suggest thisas the main loop:

do
input s1
input ...
  Topic: Re: [bascom] moving code appears to change operation (AVR)
albertsm

Replies: 2
Views: 1384

PostForum: BASCOM-AVR Archive   Posted: Tue Aug 03, 2004 10:51 pm   Subject: Re: [bascom] moving code appears to change operation (AVR)
Hi,

As the CURSOR commands has a number of options, the compiler holds a variable with the setting you make. For example for CURSOR ON, CURSOR BLINK , etc.
But the code must be placed as encounter ...
  Topic: Publishing Bascom Code
albertsm

Replies: 6
Views: 2822

PostForum: BASCOM-AVR Archive   Posted: Sat Jul 24, 2004 2:54 pm   Subject: Publishing Bascom Code
Hi,

I made export RTF for this purpose. I enabled it for everybody as i thought it was a useful feature.
I will make export HTML that will use CSS.
 
Page 344 of 347 Goto page Previous  1, 2, 3 ... 343, 344, 345, 346, 347  Next
All times are GMT + 1 Hour
Jump to: