Author |
Message |
Topic: meaning of SOCK_SYNRECV (socketstatus 5) |
Arera
Replies: 0
Views: 721
|
Forum: EASY TCP/IP Posted: Wed Dec 12, 2007 12:26 am Subject: meaning of SOCK_SYNRECV (socketstatus 5) |
Hi!
When being a TCP/ip server, Iīd like to be in listen mode (status Sock_listen 2). Sometimes, after closing the telnet connection, socketstatus swtches to 5 "SOCK_SYNRECV". I can connect again, th ... |
Topic: NM7010A Voltage: 3.0V or 3.3V? |
Arera
Replies: 3
Views: 1172
|
Forum: EASY TCP/IP Posted: Tue Dec 11, 2007 10:02 pm Subject: NM7010A Voltage: 3.0V or 3.3V? |
Yes, got it working since an couple of days. And I found out some interessting facts:
1: The SMD board uses a 3.0V reg. That differes to the manual, which says a 3.3V reg was used. 3.0V works fine, b ... |
Topic: NM7010A Voltage: 3.0V or 3.3V? |
Arera
Replies: 3
Views: 1172
|
Forum: EASY TCP/IP Posted: Mon Dec 03, 2007 12:06 pm Subject: 3.0V on SMD Board |
The SMD Adapter-board uses a 3.0 Vreg. In the manual they mention a 3.3V regulator, but thatīs a mistake. The 3.0Vreg works, but it got me away from my major problem:
I switched DIP7 and 8 OFF.
That ... |
Topic: OT: Insulating Tape? |
Arera
Replies: 3
Views: 1281
|
Forum: Various Posted: Sun Nov 18, 2007 5:40 pm Subject: OT: Insulating Tape? |
Hi Pete!
RS-components offers a whole lot of conformal coatings. They are located in GB, with a branch in germany.
Here is a link to the german online catalogue:
http://www.rsonline.de/cgi-bin/bv ... |
Topic: NM7010A Voltage: 3.0V or 3.3V? |
Arera
Replies: 3
Views: 1172
|
Forum: EASY TCP/IP Posted: Fri Nov 16, 2007 5:20 pm Subject: NM7010A Voltage: 3.0V or 3.3V? |
Hi!
My easyTCP/IP does still not work. The SMD Vreg gives 3.0V at Uin = 5V.
It should be 3.3V?
Can please someone measure in a working System?
And there is an other thing I#m not shure about:
Whe ... |
Topic: Connection LED on RJ45 Jack |
Arera
Replies: 0
Views: 697
|
Forum: EASY TCP/IP Posted: Fri Oct 12, 2007 3:58 pm Subject: Connection LED on RJ45 Jack |
Solderwork is done!
My very first experiances with easyTcpIP are to happen...
And there are first problems occuring:
I connect the Easy TCP/IP directly to my PC via a crossed networkcable.
In that ... |
Topic: Data exchange between PC and EASY TCP/IP |
Arera
Replies: 7
Views: 1621
|
Forum: EASY TCP/IP Posted: Thu Oct 11, 2007 3:38 pm Subject: Data exchange between PC and EASY TCP/IP |
Sounds good to me.
But the link doesnīt work.
Could you please check it?
Thanks a lot for your help!
Marc |
Topic: Data exchange between PC and EASY TCP/IP |
Arera
Replies: 7
Views: 1621
|
Forum: EASY TCP/IP Posted: Thu Oct 11, 2007 7:28 am Subject: Data exchange between PC and EASY TCP/IP |
That means (at least to me...) data exchange between PC an EasyTcpIp is not THAT easy
Thank you Ben for the links, but I need an .exe!
I donīt know anything about VB
I expecte ... |
Topic: Data exchange between PC and EASY TCP/IP |
Arera
Replies: 7
Views: 1621
|
Forum: EASY TCP/IP Posted: Wed Oct 10, 2007 12:12 pm Subject: Data exchange between PC and EASY TCP/IP |
Yes, I read about the the differences between UDP an TCP.
But my question is on a "lower level":
What programm do I use on my PC to UDP-connetct to the EASY TCP/IP module? |
Topic: Data exchange between PC and EASY TCP/IP |
Arera
Replies: 7
Views: 1621
|
Forum: EASY TCP/IP Posted: Tue Oct 09, 2007 9:01 pm Subject: Data exchange between PC and EASY TCP/IP |
Hi everyone!
Iīm at the very beginning with my EASY TCP/IP experiances.
In fact, the board isnīt soldered yet...
But Iīm impatient!
There one aspect, I do not really understad:
How will I exc ... |
Topic: Atmega128 (SCL\INT0) PD0 with IIM7010A module |
Arera
Replies: 5
Views: 1594
|
Forum: EASY TCP/IP Posted: Mon Sep 24, 2007 5:08 pm Subject: Atmega128 (SCL\INT0) PD0 with IIM7010A module |
cool...
peace, Marc |
Topic: Atmega128 (SCL\INT0) PD0 with IIM7010A module |
Arera
Replies: 5
Views: 1594
|
Forum: EASY TCP/IP Posted: Mon Sep 24, 2007 1:39 pm Subject: Your Signature |
Hi Peter,
Iīm shure you didnīt know:
Your signature "Arbeit macht frei" is a Nazi-Slogan (Poor translation: "Working means freedom"). The wrote it on the KZ-Gates as a "welcome" for those millio ... |
|