Author |
Message |
Topic: time(clock_sys) produces HH:MM:SS in Hex! |
uhrmacher
Replies: 4
Views: 2327
|
Forum: BASCOM-AVR Unsupported versions Posted: Mon Aug 02, 2021 11:09 am Subject: time(clock_sys) produces HH:MM:SS in Hex! |
Hi,
Hard to say what could be going wrong without sharing us the mcu your are using, stack and frame size, declaration of you variable and a compilable example.
This is what I find strange so far: ... |
Topic: time(clock_sys) produces HH:MM:SS in Hex! |
uhrmacher
Replies: 4
Views: 2327
|
Forum: BASCOM-AVR Unsupported versions Posted: Mon Aug 02, 2021 10:30 am Subject: Re: time(clock_sys) produces HH:MM:SS in Hex! |
I'sorry confusing you with an typo, the correct line is:
time$=time(clock_sys) |
Topic: time(clock_sys) produces HH:MM:SS in Hex! |
uhrmacher
Replies: 4
Views: 2327
|
Forum: BASCOM-AVR Unsupported versions Posted: Thu Jul 08, 2021 12:57 pm Subject: time(clock_sys) produces HH:MM:SS in Hex! |
Hello dear Bascom members,
i work with bascom now so many many years and i was surprised to see this:
Normally a clock time which is prepared by the bascom "time" functions shows for example 12: ... |
Topic: bascom bootloader run well for years but error messages now |
uhrmacher
Replies: 4
Views: 726
|
Forum: BASCOM-AVR Posted: Sun Jul 05, 2020 9:02 am Subject: ! solved :-) |
Goedemorgen Evert, Hello MWS // solved
With the kindly help of you both i was able to fix the problem:
for, ...i don't know the reason, in this file the $asm and $end asm codes gone lost.. ... |
Topic: bascom bootloader run well for years but error messages now |
uhrmacher
Replies: 4
Views: 726
|
Forum: BASCOM-AVR Posted: Sat Jul 04, 2020 9:02 pm Subject: bascom bootloader run well for years but error messages now |
Hi bascom colleagues,
since many years i use the bootloader and there was no problem with that.... now, with a new application i had very small edited the filename and compiled the bootloader and B ... |
Topic: DCF77 wrong data... |
uhrmacher
Replies: 0
Views: 1557
|
Forum: BASCOM-AVR Posted: Tue May 19, 2020 11:30 am Subject: DCF77 wrong data... |
Hi Folks,
My topic is the DCF-77 application which makes my hair stand up...
A DCF Receiver is connected to PortD.3 and i just looked about the incoming raw data. But not as expected, these data ... |
Topic: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0. |
uhrmacher
Replies: 12
Views: 7436
|
Forum: BASCOM-ARDUINO Posted: Tue Apr 11, 2017 8:11 am Subject: Arduino megaand ethernet shield ping solved.... |
remembering.....my problem was, not having a response while ping the arduino....
on my first used hardware, consisting of an arduino mega + ethernet shield2, i have found that the ethernet shield h ... |
Topic: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0. |
uhrmacher
Replies: 12
Views: 7436
|
Forum: BASCOM-ARDUINO Posted: Mon Apr 03, 2017 10:05 am Subject: SPI between Arduino mega and ethernet shield |
Hello, good morning
@marc - my email is now updated, sorry for leaving it "old"
-> i have updated successful to 2.0.8.0 and retried to compile with the "chip = W5500" in line Config T ... |
Topic: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0. |
uhrmacher
Replies: 12
Views: 7436
|
Forum: BASCOM-ARDUINO Posted: Thu Mar 30, 2017 8:11 am Subject: added the ethernet shield schematic... |
i added the schematic of ethernet shield |
Topic: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0. |
uhrmacher
Replies: 12
Views: 7436
|
Forum: BASCOM-ARDUINO Posted: Thu Mar 30, 2017 8:04 am Subject: arduinomega(2560)+ethernetshield2(Wiz5500)@bascom 2.0.7.8 |
- this stuff i work with and how : ----------------------------------------------------------------------------------
used Bascom Version: 2.0.7.8.001
used Hardware: ArduinoMega 2560 PCB Revision ... |
Topic: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0. |
uhrmacher
Replies: 12
Views: 7436
|
Forum: BASCOM-ARDUINO Posted: Wed Mar 29, 2017 11:11 am Subject: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0. |
Hi bascom colleagues,
....recently i came in contact with arduino "ready to use" modules , previous i was used to design myself hardware by pcb and atmega chips.
the target is, to realize a small ... |
Topic: uno and maga2560 drawing of correlation of the pinout |
uhrmacher
Replies: 2
Views: 3572
|
Forum: BASCOM-ARDUINO Posted: Wed Mar 29, 2017 5:59 am Subject: merci bien! |
Bonjour,
simply i would like to say merci bien, i use a arduino mega and the drawings are very helpful for me!
Ingolf |
Topic: ARP generator |
uhrmacher
Replies: 13
Views: 4891
|
Forum: EASY TCP/IP Posted: Wed Oct 28, 2015 1:39 pm Subject: ARP generator |
Mark: i agree, the schematic is the more important part.....ah, the pdf was gone.....here it is attached..... please rename extension txt to PDF! thanks!
Ben: the IP setting of the PC:
ip adres ... |
Topic: ARP generator |
uhrmacher
Replies: 13
Views: 4891
|
Forum: EASY TCP/IP Posted: Wed Oct 28, 2015 8:10 am Subject: ARP generator |
God morning Mark, Ben,
sorry that i not post complete code gentlemen so here it is:
@ BEN: i have had corrected the standard gateway to 193.0.161.1. but response is
Ping wird ausgeführt f ... |
Topic: ARP generator |
uhrmacher
Replies: 13
Views: 4891
|
Forum: EASY TCP/IP Posted: Mon Oct 26, 2015 2:23 pm Subject: ARP generator |
Hi Mark,
as Ben says, i have :
config Tcpip = Noint, MAC = 00.34.32.13.196,33 , IP = 193.0.161.10 , Submask = 255.255.255.0 , Gateway = 192.168.1.1 , localport = 1000 , Tx = $55 , RX = $55 , ... |
|