Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Search found 60 matches
www.mcselec.com Forum Index
Author Message
  Topic: time(clock_sys) produces HH:MM:SS in Hex!
uhrmacher

Replies: 4
Views: 294

PostForum: BASCOM-AVR Unsupported versions   Posted: Mon Aug 02, 2021 11:09 am   Subject: time(clock_sys) produces HH:MM:SS in Hex!
Hi,
Hard to say what could be going wrong without sharing us the mcu your are using, stack and frame size, declaration of you variable and a compilable example.

This is what I find strange so far: ...
  Topic: time(clock_sys) produces HH:MM:SS in Hex!
uhrmacher

Replies: 4
Views: 294

PostForum: BASCOM-AVR Unsupported versions   Posted: Mon Aug 02, 2021 10:30 am   Subject: Re: time(clock_sys) produces HH:MM:SS in Hex!




I'sorry confusing you with an typo, the correct line is:


time$=time(clock_sys)
  Topic: time(clock_sys) produces HH:MM:SS in Hex!
uhrmacher

Replies: 4
Views: 294

PostForum: BASCOM-AVR Unsupported versions   Posted: Thu Jul 08, 2021 12:57 pm   Subject: time(clock_sys) produces HH:MM:SS in Hex!
Hello dear Bascom members,

i work with bascom now so many many years and i was surprised to see this:

Normally a clock time which is prepared by the bascom "time" functions shows for example 12: ...
  Topic: bascom bootloader run well for years but error messages now
uhrmacher

Replies: 4
Views: 551

PostForum: BASCOM-AVR   Posted: Sun Jul 05, 2020 9:02 am   Subject: ! solved :-)
Goedemorgen Evert, Hello MWS // solved Smile


With the kindly help of you both i was able to fix the problem:

for, ...i don't know the reason, in this file the $asm and $end asm codes gone lost.. ...
  Topic: bascom bootloader run well for years but error messages now
uhrmacher

Replies: 4
Views: 551

PostForum: BASCOM-AVR   Posted: Sat Jul 04, 2020 9:02 pm   Subject: bascom bootloader run well for years but error messages now
Hi bascom colleagues,

since many years i use the bootloader and there was no problem with that.... now, with a new application i had very small edited the filename and compiled the bootloader and B ...
  Topic: DCF77 wrong data...
uhrmacher

Replies: 0
Views: 324

PostForum: BASCOM-AVR   Posted: Tue May 19, 2020 11:30 am   Subject: DCF77 wrong data...
Hi Folks,

My topic is the DCF-77 application which makes my hair stand up...

A DCF Receiver is connected to PortD.3 and i just looked about the incoming raw data. But not as expected, these data ...
  Topic: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0.
uhrmacher

Replies: 12
Views: 2669

PostForum: BASCOM-ARDUINO   Posted: Tue Apr 11, 2017 8:11 am   Subject: Arduino megaand ethernet shield ping solved....
remembering.....my problem was, not having a response while ping the arduino....

on my first used hardware, consisting of an arduino mega + ethernet shield2, i have found that the ethernet shield h ...
  Topic: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0.
uhrmacher

Replies: 12
Views: 2669

PostForum: BASCOM-ARDUINO   Posted: Mon Apr 03, 2017 10:05 am   Subject: SPI between Arduino mega and ethernet shield
Hello, good morning Smile

@marc - my email is now updated, sorry for leaving it "old"


-> i have updated successful to 2.0.8.0 and retried to compile with the "chip = W5500" in line Config T ...
  Topic: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0.
uhrmacher

Replies: 12
Views: 2669

PostForum: BASCOM-ARDUINO   Posted: Thu Mar 30, 2017 8:11 am   Subject: added the ethernet shield schematic...
i added the schematic of ethernet shield
  Topic: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0.
uhrmacher

Replies: 12
Views: 2669

PostForum: BASCOM-ARDUINO   Posted: Thu Mar 30, 2017 8:04 am   Subject: arduinomega(2560)+ethernetshield2(Wiz5500)@bascom 2.0.7.8
- this stuff i work with and how : ----------------------------------------------------------------------------------
used Bascom Version: 2.0.7.8.001
used Hardware: ArduinoMega 2560 PCB Revision ...
  Topic: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0.
uhrmacher

Replies: 12
Views: 2669

PostForum: BASCOM-ARDUINO   Posted: Wed Mar 29, 2017 11:11 am   Subject: arduino mega (2560) + ethernet shield(Wiz5500) @ bascom 2.0.
Hi bascom colleagues,

....recently i came in contact with arduino "ready to use" modules , previous i was used to design myself hardware by pcb and atmega chips.
the target is, to realize a small ...
  Topic: uno and maga2560 drawing of correlation of the pinout
uhrmacher

Replies: 2
Views: 1074

PostForum: BASCOM-ARDUINO   Posted: Wed Mar 29, 2017 5:59 am   Subject: merci bien!
Bonjour,

simply i would like to say merci bien, i use a arduino mega and the drawings are very helpful for me!

Ingolf
  Topic: ARP generator
uhrmacher

Replies: 13
Views: 1450

PostForum: EASY TCP/IP   Posted: Wed Oct 28, 2015 1:39 pm   Subject: ARP generator
Mark: i agree, the schematic is the more important part.....ah, the pdf was gone.....here it is attached..... please rename extension txt to PDF! thanks!

Ben: the IP setting of the PC:

ip adres ...
  Topic: ARP generator
uhrmacher

Replies: 13
Views: 1450

PostForum: EASY TCP/IP   Posted: Wed Oct 28, 2015 8:10 am   Subject: ARP generator
God morning Mark, Ben,

sorry that i not post complete code gentlemen so here it is:

@ BEN: i have had corrected the standard gateway to 193.0.161.1. but response is

Ping wird ausgeführt f ...
  Topic: ARP generator
uhrmacher

Replies: 13
Views: 1450

PostForum: EASY TCP/IP   Posted: Mon Oct 26, 2015 2:23 pm   Subject: ARP generator
Hi Mark,

as Ben says, i have :



config Tcpip = Noint, MAC = 00.34.32.13.196,33 , IP = 193.0.161.10 , Submask = 255.255.255.0 , Gateway = 192.168.1.1 , localport = 1000 , Tx = $55 , RX = $55 , ...
 
Page 1 of 4 Goto page 1, 2, 3, 4  Next
All times are GMT + 1 Hour
Jump to: