Author |
Message |
Topic: chinas the clone of the classic '51 |
plouf
Replies: 36
Views: 8329
|
Forum: BASCOM-8051 Posted: Tue Feb 27, 2024 10:04 am Subject: chinas the clone of the classic '51 |
sending chip's is the easiest , i will order some to test only for the sake of quriosity.. only 0.3 with 8k adc etc (and 17kbyte at 0.33) !?
Did you buy these chips?
It would be interesting to c ... |
Topic: ATTINY1624/1626/1627 series programming possible? |
plouf
Replies: 4
Views: 465
|
Forum: BASCOM-AVR XTINY/MEGAX/AVRX Posted: Mon Feb 12, 2024 3:59 pm Subject: ATTINY1624/1626/1627 series programming possible? |
STC 32 bit 8051? did not found that. seems odd since it is 8 bit processor?
chinese mind are always diffirent....
https://www.stcmicro.com/stcmcu.html second entry , has 4 mcu .. dunno ... |
Topic: ATTINY1624/1626/1627 series programming possible? |
plouf
Replies: 4
Views: 465
|
Forum: BASCOM-AVR XTINY/MEGAX/AVRX Posted: Sun Feb 11, 2024 5:46 pm Subject: ATTINY1624/1626/1627 series programming possible? |
After that i will have a look at tiny1624 platform. And EB platform.
The oscillator options are different in each platform. personally i do not understand it. for a user it means to check help of ... |
Topic: Bascom-8051 starts after a long delay |
plouf
Replies: 9
Views: 3921
|
Forum: BASCOM-8051 Posted: Mon Jan 22, 2024 8:02 pm Subject: Bascom-8051 starts after a long delay |
following this old post
BASCOM DEMO (2.0.14 ??) takes 3 to 10 minutes to start, while full version (2.0.18.0) start in 2 sec's
dont know if it intended... |
Topic: chinas the clone of the classic '51 |
plouf
Replies: 36
Views: 8329
|
Forum: BASCOM-8051 Posted: Thu Jan 18, 2024 3:02 pm Subject: chinas the clone of the classic '51 |
So for now i implement the programming protocol and some DAT files along with support for the hardware.
Support for hardware means full or relative hight peripheral support ?
Dual uart, i2c ad ... |
Topic: Maerklin Motorolla Railroad |
plouf
Replies: 11
Views: 3025
|
Forum: BASCOM-AVR Posted: Fri Jan 12, 2024 10:13 am Subject: Maerklin Motorolla Railroad |
Isnt bot a little extreme in positions ?
I agree to some points with MWS hat the "story" has little impact to request
On the other hand JOJO maybe its just "less capable" reason asking for some he ... |
Topic: chinas the clone of the classic '51 |
plouf
Replies: 36
Views: 8329
|
Forum: BASCOM-8051 Posted: Tue Jan 09, 2024 12:09 pm Subject: chinas the clone of the classic '51 |
implementation means (almost) full working ?
i.e SPI / i2C / 2x UART / ADC etc ?
saying because alexander said that in his dat some of them do no work ..
sending chip's is the easiest , i w ... |
Topic: chinas the clone of the classic '51 |
plouf
Replies: 36
Views: 8329
|
Forum: BASCOM-8051 Posted: Sat Jan 06, 2024 10:19 pm Subject: chinas the clone of the classic '51 |
Amazing chips... Really
Worth take a look sometime i see them as low as 0,3eur + ship !! With 8k rom!
Chinese companies have this drawback. Hardly reply to hobbyst/small/outside china
Which is ... |
Topic: AVR128DB 1k write/erase endurance FLASH. |
plouf
Replies: 14
Views: 1577
|
Forum: BASCOM-AVR XTINY/MEGAX/AVRX Posted: Tue Dec 12, 2023 6:29 am Subject: AVR128DB 1k write/erase endurance FLASH. |
thats why said "most"applications
in rare cases you do it, otherwise you use eeprom
however the most mysterious reason is why suddenly and only these devices have this limitation, while all other ... |
Topic: AVR128DB 1k write/erase endurance FLASH. |
plouf
Replies: 14
Views: 1577
|
Forum: BASCOM-AVR XTINY/MEGAX/AVRX Posted: Sun Dec 10, 2023 5:59 pm Subject: AVR128DB 1k write/erase endurance FLASH. |
Thats sad.. for a lot of applications 1k is enough, but for fail safe applications ( need to rememberr its status after power off) is too few....
Wonder what the problem is proccess they have since ... |
Topic: Communicating with a PC program via USB |
plouf
Replies: 5
Views: 10807
|
Forum: Various Posted: Fri Oct 20, 2023 4:40 am Subject: Communicating with a PC program via USB |
But nano uses a ftdi usb<>serial so your pc program need to use a "com" port and nothing else
(Driver less) |
Topic: BasCom AVR version 2086 |
plouf
Replies: 29
Views: 11738
|
Forum: BASCOM-AVR Posted: Sat Aug 26, 2023 12:14 pm Subject: BasCom AVR version 2086 |
Most "coders" understand it fully
But in everyday use mind goes to anyrhing its simpler at the dedicated time.
Bored to move abother hand, used for another task, or just not working keyboard.... ... |
Topic: BasCom AVR version 2086 |
plouf
Replies: 29
Views: 11738
|
Forum: BASCOM-AVR Posted: Fri Aug 25, 2023 8:54 am Subject: BasCom AVR version 2086 |
not use this, but i agree that copy/paste is the first thing everyone expects every where.
Keyboard shortcut SHOULD work in parallel for practical reasons, |
Topic: Update V2.085 |
plouf
Replies: 9
Views: 3555
|
Forum: BASCOM-AVR Posted: Sat Jul 15, 2023 10:41 pm Subject: Update V2.085 |
the patch is a patch for 2085 look a bit higher you you will see "Download full BASCOM-AVR" |
Topic: Update V2.085 |
plouf
Replies: 9
Views: 3555
|
Forum: BASCOM-AVR Posted: Thu Jul 13, 2023 8:55 pm Subject: Update V2.085 |
AFAIK there is only full version download not uptate
The file you have download (zip) you have to fisrt fully unzip and then execute dont try within compressed file to execute |
|