Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Search found 18 matches
www.mcselec.com Forum Index
Author Message
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Wed Jan 27, 2021 1:09 am   Subject: HX711
Finally I got it, tips from you and lots of copying and pasting, I am not a trained programmer but have tried and failed since CBM64 in my youth but this type of programming is very complicated, but I ...
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Fri Jan 22, 2021 12:29 am   Subject: HX711
Thanks.
I understand simple basic programming but this is too complicated for an old man like me and therefore I wants lots of help, help with the whole program is of course invaluable help and thank ...
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Thu Jan 21, 2021 11:56 pm   Subject: HX711
I use this code when I have only one HX711

$regfile = "m8def.dat"

$crystal = 3686400

$baud = 9600

$hwstack = 64
$swstack = 10
$framesize = 24

Hx711_clk Alias Portb.0
Hx711_dat ...
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Thu Jan 21, 2021 7:33 pm   Subject: HX711
I am aware of Gosub but where in my code should I insert Gosub Hx711get1, Gosub Hx711get2, Gosub Hx711get3 abd Gosub Hx711get4.
I am aware of the principle of Basic since the 80's with CBM64 but Basc ...
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Thu Jan 21, 2021 12:59 pm   Subject: HX711
You can create four types of ports for the program you copied and worked on, and call each of them.
Hx711_clk Alias Portd.2
Hx711_dat Alias Pind.3

'
' ****************************** ...
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Thu Jan 14, 2021 1:36 pm   Subject: HX711
All you have to do is assign

This became a little too difficult for an amateur like me, how can I get someone to make the code for me, it is important to me since there is no finished equipment fo ...
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Thu Nov 26, 2020 10:31 am   Subject: HX711
Next, how can I read data from 4 pcs. hx711 with 1 Atmega 8?
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Sat Feb 01, 2020 10:51 am   Subject: HX711
I'm glad I could help you!

Calibration and zero adjustment are required depending on the type of load cell, so please devise it.

Thanks, the app in my Mac take care of calibration and zero adjus ...
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Thu Jan 30, 2020 8:11 pm   Subject: HX711
so far this work for me


$regfile = "m16def.dat"

$crystal = 3686400

$baud = 9600

$hwstack = 64
$swstack = 10
$framesize = 24

Hx711_clk Alias Portd.2
Hx711_dat Alias Pind.3

...
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Thu Jan 30, 2020 9:52 am   Subject: HX711
Hi,
I tested it and wrote an article.
It should be helpful.

Japanese site.
http://www.ne.jp/asahi/shared/o-family/ElecRoom/AVRMCOM/HX711Test/HX711Test.html

English translation site.
http://t ...
  Topic: HX711
odemmo

Replies: 25
Views: 1969

PostForum: BASCOM-AVR   Posted: Tue Jan 28, 2020 1:40 pm   Subject: HX711
Does anyone have a code to read data from HX711, I just need to read the weight from the load cell and write them to serial, I have searched a lot on the internet without finding anything, please.

(B ...
  Topic: DS18B20 instead of DS18S20
odemmo

Replies: 3
Views: 446

PostForum: BASCOM-AVR   Posted: Tue Oct 16, 2018 8:45 pm   Subject: DS18B20 instead of DS18S20
After a lot of exploration on the internet and here on the forum I found a code for the DS18B20 which after some stripping helped me.

Here is my code:

$regfile = "m16def.dat"

$crystal = 36864 ...
  Topic: DS18B20 instead of DS18S20
odemmo

Replies: 3
Views: 446

PostForum: BASCOM-AVR   Posted: Tue Oct 16, 2018 2:28 pm   Subject: DS18B20 instead of DS18S20
Thank you Paul, look forward to more codes for the DS18B20

Oddvar
  Topic: DS18B20 instead of DS18S20
odemmo

Replies: 3
Views: 446

PostForum: BASCOM-AVR   Posted: Sun Oct 14, 2018 10:53 am   Subject: DS18B20 instead of DS18S20
Can anyone help modify the code so that a DS18B20 can be used.
My code is copied from the forum and modified because it is too complicated to learn all this.

$regfile = "m16def.dat "
$baud = ...
  Topic: I need programmer.
odemmo

Replies: 0
Views: 170

PostForum: BASCOM-AVR Archive   Posted: Tue Nov 20, 2012 12:03 am   Subject: I need programmer.
I need someone to program a Atiny2313 to read the NAU 7802 24 bit ADC whith loadcells and then print the weight.
The I2c was a bit dificulte fore me.
Is it posible fore someone to do that ?
Sorr ...
 
Page 1 of 2 Goto page 1, 2  Next
All times are GMT + 1 Hour
Jump to: