Search found 90 matches

Hi
I notice the ATmega406 is " supported" - is there anybody that have used this cpu in a BMS application .

It looks like the perfect all in one 4 cell bms chip .

Kind regards
Nico

(B ...

Hi
I need a programmable monostable - similar to a 555 one shot - but I want to be able to change the pulse length .

Time delay between 0.5 sec to about 10 seconds but that is not critical . ...

Hi
I now have a working unit - it can read and search 240 rfid fobs and reply with the set distance , that take about 200us , with avr at 16MHz.
So that is a lot faster than the rfid read ...

Hi
Thanks for the feedback .

At the moment the rfid reader chip serial speed is fixed at 9600 - can change later with other hardware . 9600 is slow in todays fast world but looks as i ...

Hi
Thanks again for the replies.

It is possible to place sensors at the track and sens the trolley itself , multiple hall type sensors will work . Mechanical mounting and wiring need to ch ...

Hi
Thanks for the replies .

The rfid read speed is actually very fast - if I mount a few about 250 mm spacing and slide the fobs close to the read coil I get the id's over the serial .
...

Hi

I am planning a RFid distance sensor .

The idea is to mount a lot of rfid fobs at about 200 mm intervals and then by reading the id's get a location value ( linear track of about ...

Hi
I just now notice the latest post regarding the library - very good news .

CAN on BASCOM is super easy - hope this lib will work as a second port .

Regards
Nico

Hi

I have a project that require 2 CAN bus 'ports'

One way is to use more powerful dual can port ARM chips .

But I prefer the BASCOM route with one channel a AT90 CAN 128 - th ...

Hi .

I use a XX128 with a USB- serial interface with SD card for data .

At the moment I need to take the SD card out and , get filename and copy the file to a pc if required , all working ...

WHAT ? My first reaction as I scroll through Marks post .
The sad news kind of shock you , as if a person that you read from or 'connect' with on the net should live forever.
But in Ben's ...

Hi
Yes , value is a word .

will have a look at your sugestion .

Thanks
Cheers

Hi ,
The plan is just to print a value if it changed but only if it changed by more than a dela value .

The values are between 0 and 4095

Cheers

Hi
Now that is a cool plan , never thought of it . thanks .

Cheers

Hi
The idea behind any bus system - serial or mod or profi ... is to keep the data time on the bus to the minimum .

So - the question is , what is the 17 bytes for - maybe you do not need to ...