Search found 50 matches

Hi,

During testing PWM at Attiny441 I found out that this code give error:
Config Timer0 = Pwm , Compare A Pwm = Clear Up , Compare B Pwm = Clear Up , Prescale = 8
can be written only like this ...

Hi,

Please can anybody help with PWM at Attiny441 ? I need on ports TOCC0, TOCC1, TOCC2 to get standard 8 bit PWM

Thanks

(BASCOM-AVR version : 2.0.8.0. , Latest : 2.0.7.8 )

Hi,

In the newest version 2.0.8.0. is intersting error in IDE. Some lines are in gray color and in italic style - at some lines is italic only in some part.
If is inserted some line before changed ...

Hi,

Please can anybody help with this:

I would like to have Timer1 as adjustable monostable multivibrator. Processor Attiny4313, Xtal 16MHz. The trigerring input INT1, output OC1B with active hi ...

It is OK now.

Hi,

Does anybody know why this interrupt "On UCSR0A.RXC0 Read_serial" gives me error message: ""

for Atmega162 ?

Thanks

(BASCOM-AVR version : 2.0.7.8 )

I can generate 36 KHz from port PD4 and HW USART on port PD3

Tcd5_ctrle = 1
Tcd5_cca = 333 ' 36kHz output
Tcd5_ctrla = &H01
...

I want to use transfer only any standard bytes with 1200 bps - no protocol.

Hi,

I want transmit data with IR way over UART. The modulation frequency 36 Khz or 38 Khz. Can anybody help
how can I do it ? I want to use Atxmega32E5.

Thanks

(BASCOM-AVR version : 2.0.7.9 ...

Hi,

When I write this code and compile it I got error: CONST already specified $regfile = "xm128c3def.dat"

$crystal = 32000000
$hwstack = 50
$swstack = 50
$framesize = 50

How r ...

Hi

At Attiny441 I want to use USART at PINB.2 - RXD0 instead default PINA.2 . Thus I wrote:

----------------------------------------------------------------------------------------------------- ...

Hi,

At Atxmega32E5 I need sometimes in program to use PORTD.3 for other putpose. When I use Usartd0_ctrlb = &B00000000 then I disable USART but pin is in low state and I can not
set it to ...

It is OK now

T H A N K S ! ! !

The same problem is after CLS only When I rotate screen then are these pixels on the same place - random pixels are not rotated. Connection of LCD is as short as possible. All texts sent to LCD are O ...

Hi,

I use LCD with ST7565R driver 128*64. I use glcdEADOGM128x6.lbx. Almost all is OK but at left side of LCD are shown some random pixels.
Can anybody told me what is it ? I tested 3 LCD with the ...