Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Search found 81 matches
www.mcselec.com Forum Index
Author Message
  Topic: atmega32u4 and timer interrupt
krolikbest

Replies: 7
Views: 189

PostForum: BASCOM-AVR   Posted: Thu Jul 08, 2021 8:04 am   Subject: atmega32u4 and timer interrupt
So in the end working project. Interesting is that after changing my usb-uart converter I had no more problems with the Micro. Here you can see finished machine https://www.youtube.com/watch?v=GtmhI39 ...
  Topic: atmega32u4 and timer interrupt
krolikbest

Replies: 7
Views: 189

PostForum: BASCOM-AVR   Posted: Tue Jun 29, 2021 3:38 pm   Subject: atmega32u4 and timer interrupt
I found the cause but don't know yet why. After reseting Micro (button push) I have to disconnect usb (one as a power) and second usb where is my uart-usb converter. Also close Bascom terminal. Then c ...
  Topic: atmega32u4 and timer interrupt
krolikbest

Replies: 7
Views: 189

PostForum: BASCOM-AVR   Posted: Tue Jun 29, 2021 1:42 pm   Subject: atmega32u4 and timer interrupt
Hi,

MWS - absolutely righ Smile I had to mix something during copy-paste
EDC - both versions work in simulation, but on real hardware somehow don't. I use avrdude with params
-p atmega32u4 -c avr1 ...
  Topic: atmega32u4 and timer interrupt
krolikbest

Replies: 7
Views: 189

PostForum: BASCOM-AVR   Posted: Tue Jun 29, 2021 10:48 am   Subject: atmega32u4 and timer interrupt
Hi,

this code is similar to code I use on Uno, except that interrupts are on different pins. On Uno this code works but on Micro it seems that timer0 interrupt is not executed or should I make it ...
  Topic: Arduino MICRO
krolikbest

Replies: 2
Views: 89

PostForum: BASCOM-ARDUINO   Posted: Fri Jun 25, 2021 6:32 pm   Subject: Arduino MICRO
Oh, I simply mixed coms up. My expectation was that after uploading I'd see in terminal emulator incomig data via Micro usb data. wrong way. I had simply to connect to RX/TX pins of Micro to usb conve ...
  Topic: Arduino MICRO
krolikbest

Replies: 2
Views: 89

PostForum: BASCOM-ARDUINO   Posted: Fri Jun 25, 2021 12:11 pm   Subject: Arduino MICRO
A little progres, (this link: https://forum.arduino.cc/t/avrdude-cant-find-com/626194/3) :
The Arduino IDE does a special process when uploading to the Leonardo that doesn't happen when you are uploa ...
  Topic: Arduino MICRO
krolikbest

Replies: 2
Views: 89

PostForum: BASCOM-ARDUINO   Posted: Fri Jun 25, 2021 11:35 am   Subject: Arduino MICRO
Hi,

It touches barely to Bascom (exept that hex filke is done there) but need to port my project from Uno to Micro. As I've already found out from 'internet' that to upload hex file is to use avrd ...
  Topic: How set esp8266 in light sleep mode?
krolikbest

Replies: 4
Views: 331

PostForum: Various   Posted: Wed Dec 30, 2020 2:54 pm   Subject: How set esp8266 in light sleep mode?
What i've noticed that not always it works (my previous description light-sleep). Don't know why. Anyhow yesterday I've bought esp8266-12 and it has reset pin set out on pcb. Tested At command "AT+GSL ...
  Topic: How set esp8266 in light sleep mode?
krolikbest

Replies: 4
Views: 331

PostForum: Various   Posted: Mon Dec 28, 2020 4:07 pm   Subject: How set esp8266 in light sleep mode?
Thank you for the response. I considered something similar but having so much ahead to write on RaspPi and uC I gave this idea up (I consider myself more a programmer than electronic engineer). But ch ...
  Topic: How set esp8266 in light sleep mode?
krolikbest

Replies: 4
Views: 331

PostForum: Various   Posted: Sun Dec 27, 2020 10:11 pm   Subject: How set esp8266 in light sleep mode?
Hi,
perhaps a little off-topic, so then I'm sorry. Now I'm working on communicating PC-esp8266-uC. All commands between uC and esp8266 are as AT commands included in Bascom code on uC side. There is ...
  Topic: New Avr question
krolikbest

Replies: 2
Views: 429

PostForum: BASCOM-AVR   Posted: Wed Oct 21, 2020 5:45 pm   Subject: New Avr question
Thank you for an answer and info. Surely i'll check that.

Regards,
Martin
  Topic: New Avr question
krolikbest

Replies: 2
Views: 429

PostForum: BASCOM-AVR   Posted: Wed Oct 21, 2020 12:23 pm   Subject: New Avr question
Hi

I'd like to use new chips - new avr family like attiny85 and so on. What should I do in order to program them? I'm aware that I need to use Bascom ver. 2.0.8.3 and commercial add-on (btw. purch ...
  Topic: Qestion about ATtiny13
krolikbest

Replies: 6
Views: 527

PostForum: Various   Posted: Fri Sep 11, 2020 11:23 am   Subject: Qestion about ATtiny13
Yes, resistance (working stability) for low temperatur is important. I'm still on a very initail stage of project thus there is not a problem to consider change of chip and there I've more points to t ...
  Topic: Qestion about ATtiny13
krolikbest

Replies: 6
Views: 527

PostForum: Various   Posted: Fri Sep 11, 2020 6:41 am   Subject: Qestion about ATtiny13
There is a possibility of destructive load/pressure damage and that is why I decided to use tiny13 and the esp8266-01. This kind of sensor should give me a warning shortly before being damaged and th ...
  Topic: Qestion about ATtiny13
krolikbest

Replies: 6
Views: 527

PostForum: Various   Posted: Thu Sep 10, 2020 1:42 pm   Subject: Qestion about ATtiny13
Hello,

currently I'm building a small collecting system based on ATtiny13. In short: chip reads some signal from tilt sensor and sends some info through esp8266 (as a 'AT' commands) to computer (R ...
 
Page 1 of 6 Goto page 1, 2, 3, 4, 5, 6  Next
All times are GMT + 1 Hour
Jump to: