Author |
Message |
Topic: ROUND and INT without decimal point and "0" ? |
bzijlstra
Replies: 13
Views: 941
|
Forum: BASCOM-AVR Posted: Wed Jun 21, 2017 4:52 pm Subject: Icecream.. |
Perhaps we all should take an icecream to cool down. So much trouble in the world....
Ben Zijlstra |
Topic: Problem with Sd-hc Card |
bzijlstra
Replies: 1
Views: 2368
|
Forum: AVR-DOS Posted: Fri Jun 02, 2017 5:37 pm Subject: Need more info |
Identical PCB, but also idenditcal power supplies? For getiing troubleshooting help your info is not enough. Version Bascom-AVR? Fusebits the same on all 5 boards? Demo or prof version? The SD cards m ... |
Topic: DS1307 |
bzijlstra
Replies: 16
Views: 8256
|
Forum: BASCOM-AVR Unsupported versions Posted: Wed May 24, 2017 5:29 pm Subject: Happy? |
You make it very difficult for me. An i2c scanner scans the i2c bus and should display all i2c devices on the bus it finds. Your ds1307 occupies two addresses on hex(D0) and hex(D1. So you should see ... |
Topic: DS1307 |
bzijlstra
Replies: 16
Views: 8256
|
Forum: BASCOM-AVR Unsupported versions Posted: Tue May 23, 2017 1:19 pm Subject: Out of ideas... |
I can't see anything wrong in the hardware around the ds1307. But as long as the i2c scanner doesn't see the ds1307 it can not work with it. So you got to get that working first.
I see a lot of dis ... |
Topic: DS1307 |
bzijlstra
Replies: 16
Views: 8256
|
Forum: BASCOM-AVR Unsupported versions Posted: Tue May 23, 2017 8:32 am Subject: Pull ups? |
Google for the connection of the DS1307. There should be a pull up on sda and sclk.
Could you confirm that?
Ben Zijlstra |
Topic: DS1307 |
bzijlstra
Replies: 16
Views: 8256
|
Forum: BASCOM-AVR Unsupported versions Posted: Mon May 22, 2017 1:43 pm Subject: I2c scan |
https://www.mcselec.com/index2.php?option=com_forum&Itemid=59&page=viewtopic&t=10729&highlight=i2cscan
Here you can find the i2c scanner. Perhaps you have to change things like regf ... |
Topic: hx8357c 480x320 display |
bzijlstra
Replies: 21
Views: 8310
|
Forum: Share your working BASCOM-AVR code here Posted: Wed May 10, 2017 1:38 am Subject: Nice |
Looks very nice.
Have fun
Ben Zijlstra |
Topic: Shiftout clocks EDGE??? |
bzijlstra
Replies: 3
Views: 2754
|
Forum: BASCOM-AVR Unsupported versions Posted: Sat May 06, 2017 5:59 pm Subject: More info |
Perhaps you have to give some more information. Gone over your question but don't know what the problem is. You are talking about Slave(eeprom), is this hardware and what kind of hardware?
Not usin ... |
Topic: Send sms via AT commands doesn't work |
bzijlstra
Replies: 6
Views: 1792
|
Forum: BASCOM-AVR Posted: Tue May 02, 2017 1:57 am Subject: Cr/Lf |
Do a search on M590 in this forum. You will find a SMS sender / receiver. Check the Bascom code. I am missing carriage return/line feed.
Most terminal programs sends a Cr/Lf at the end of te line.
... |
Topic: select-case-end select |
bzijlstra
Replies: 12
Views: 2512
|
Forum: BASCOM-AVR Unsupported versions Posted: Sun Apr 30, 2017 11:57 pm Subject: Alias and variabele... |
Before you had lightlevel as alias for Portb (8 bit) but also as variabele dimmentioned as Word (16 bit). Think there was your problem. Correct me if I am wrong.
Have fun
Ben Zijlstra |
Topic: problem about config timer1 and timer3 on pwm mode(ATmega128 |
bzijlstra
Replies: 4
Views: 1277
|
Forum: BASCOM-AVR Posted: Thu Apr 20, 2017 10:39 am Subject: Fuses |
There are some 'fuses' inside the microcontroller. To handle internal or external crystal, bootloader, speed of booting etc. One of these fuses enable/disable JTAG. If the JTAG is enabled some of the ... |
Topic: problem about config timer1 and timer3 on pwm mode(ATmega128 |
bzijlstra
Replies: 4
Views: 1277
|
Forum: BASCOM-AVR Posted: Thu Apr 20, 2017 2:06 am Subject: JTAG fusebits? |
Have you checked the JTAG fusebit settings? |
Topic: Problem with Arduino Mega2560 and Ethernet Shield (W5100) |
bzijlstra
Replies: 10
Views: 1451
|
Forum: BASCOM-AVR Posted: Tue Apr 18, 2017 1:58 pm Subject: Some more to 'PEEK' |
EDC
Before there were libraries I have written software for the W5100 and AVR. But exact as you stated perhaps the best to first get this hardware running.
If you want to have a peek at what 'I' ... |
Topic: Problem with Arduino Mega2560 and Ethernet Shield (W5100) |
bzijlstra
Replies: 10
Views: 1451
|
Forum: BASCOM-AVR Posted: Tue Apr 18, 2017 1:13 pm Subject: Questions about hardware |
Still some questions:
Are you using an Arduino Mega 2560 with W5100 Ethernet shield?
Do you have other shields on it?
How is the power to this board managed? An USB cable? Power through the exter ... |
Topic: Arduino Nano with I2c LCD and backlight |
bzijlstra
Replies: 36
Views: 24285
|
Forum: BASCOM-ARDUINO Posted: Wed Apr 12, 2017 11:39 am Subject: I2c lcd working |
Well done!! The original library was written by Kent and worked also on 20x4 display with two E connections.
Have fun
Ben Zijlstra |
|