Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Search found 1174 matches
www.mcselec.com Forum Index
Author Message
  Topic: ROUND and INT without decimal point and "0" ?
bzijlstra

Replies: 13
Views: 668

PostForum: BASCOM-AVR   Posted: Wed Jun 21, 2017 4:52 pm   Subject: Icecream..
Perhaps we all should take an icecream to cool down. So much trouble in the world....

Ben Zijlstra
  Topic: Problem with Sd-hc Card
bzijlstra

Replies: 1
Views: 357

PostForum: AVR-DOS   Posted: Fri Jun 02, 2017 5:37 pm   Subject: Need more info
Identical PCB, but also idenditcal power supplies? For getiing troubleshooting help your info is not enough. Version Bascom-AVR? Fusebits the same on all 5 boards? Demo or prof version? The SD cards m ...
  Topic: DS1307
bzijlstra

Replies: 16
Views: 2096

PostForum: BASCOM-AVR Unsupported versions   Posted: Wed May 24, 2017 5:29 pm   Subject: Happy?
You make it very difficult for me. An i2c scanner scans the i2c bus and should display all i2c devices on the bus it finds. Your ds1307 occupies two addresses on hex(D0) and hex(D1. So you should see ...
  Topic: DS1307
bzijlstra

Replies: 16
Views: 2096

PostForum: BASCOM-AVR Unsupported versions   Posted: Tue May 23, 2017 1:19 pm   Subject: Out of ideas...
I can't see anything wrong in the hardware around the ds1307. But as long as the i2c scanner doesn't see the ds1307 it can not work with it. So you got to get that working first.

I see a lot of dis ...
  Topic: DS1307
bzijlstra

Replies: 16
Views: 2096

PostForum: BASCOM-AVR Unsupported versions   Posted: Tue May 23, 2017 8:32 am   Subject: Pull ups?
Google for the connection of the DS1307. There should be a pull up on sda and sclk.

Could you confirm that?

Ben Zijlstra
  Topic: DS1307
bzijlstra

Replies: 16
Views: 2096

PostForum: BASCOM-AVR Unsupported versions   Posted: Mon May 22, 2017 1:43 pm   Subject: I2c scan
https://www.mcselec.com/index2.php?option=com_forum&Itemid=59&page=viewtopic&t=10729&highlight=i2cscan

Here you can find the i2c scanner. Perhaps you have to change things like regf ...
  Topic: hx8357c 480x320 display
bzijlstra

Replies: 21
Views: 4544

PostForum: Share your working BASCOM-AVR code here   Posted: Wed May 10, 2017 1:38 am   Subject: Nice
Looks very nice.

Have fun
Ben Zijlstra
  Topic: Shiftout clocks EDGE???
bzijlstra

Replies: 3
Views: 474

PostForum: BASCOM-AVR Unsupported versions   Posted: Sat May 06, 2017 5:59 pm   Subject: More info
Perhaps you have to give some more information. Gone over your question but don't know what the problem is. You are talking about Slave(eeprom), is this hardware and what kind of hardware?

Not usin ...
  Topic: Send sms via AT commands doesn't work
bzijlstra

Replies: 6
Views: 1514

PostForum: BASCOM-AVR   Posted: Tue May 02, 2017 1:57 am   Subject: Cr/Lf
Do a search on M590 in this forum. You will find a SMS sender / receiver. Check the Bascom code. I am missing carriage return/line feed.

Most terminal programs sends a Cr/Lf at the end of te line. ...
  Topic: select-case-end select
bzijlstra

Replies: 12
Views: 1338

PostForum: BASCOM-AVR Unsupported versions   Posted: Sun Apr 30, 2017 11:57 pm   Subject: Alias and variabele...
Before you had lightlevel as alias for Portb (8 bit) but also as variabele dimmentioned as Word (16 bit). Think there was your problem. Correct me if I am wrong.

Have fun
Ben Zijlstra
  Topic: problem about config timer1 and timer3 on pwm mode(ATmega128
bzijlstra

Replies: 4
Views: 1023

PostForum: BASCOM-AVR   Posted: Thu Apr 20, 2017 10:39 am   Subject: Fuses
There are some 'fuses' inside the microcontroller. To handle internal or external crystal, bootloader, speed of booting etc. One of these fuses enable/disable JTAG. If the JTAG is enabled some of the ...
  Topic: problem about config timer1 and timer3 on pwm mode(ATmega128
bzijlstra

Replies: 4
Views: 1023

PostForum: BASCOM-AVR   Posted: Thu Apr 20, 2017 2:06 am   Subject: JTAG fusebits?
Have you checked the JTAG fusebit settings?
  Topic: Problem with Arduino Mega2560 and Ethernet Shield (W5100)
bzijlstra

Replies: 10
Views: 1104

PostForum: BASCOM-AVR   Posted: Tue Apr 18, 2017 1:58 pm   Subject: Some more to 'PEEK'
EDC

Before there were libraries I have written software for the W5100 and AVR. But exact as you stated perhaps the best to first get this hardware running.

If you want to have a peek at what 'I' ...
  Topic: Problem with Arduino Mega2560 and Ethernet Shield (W5100)
bzijlstra

Replies: 10
Views: 1104

PostForum: BASCOM-AVR   Posted: Tue Apr 18, 2017 1:13 pm   Subject: Questions about hardware
Still some questions:

Are you using an Arduino Mega 2560 with W5100 Ethernet shield?
Do you have other shields on it?
How is the power to this board managed? An USB cable? Power through the exter ...
  Topic: Arduino Nano with I2c LCD and backlight
bzijlstra

Replies: 34
Views: 8721

PostForum: BASCOM-ARDUINO   Posted: Wed Apr 12, 2017 11:39 am   Subject: I2c lcd working
Well done!! The original library was written by Kent and worked also on 20x4 display with two E connections.

Have fun
Ben Zijlstra
 
Page 1 of 79 Goto page 1, 2, 3 ... 77, 78, 79  Next
All times are GMT + 1 Hour
Jump to: