Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Search found 11 matches
www.mcselec.com Forum Index
Author Message
  Topic: ADC1 & xtiny (ATTINY3217)
Skrivo

Replies: 4
Views: 317

PostForum: BASCOM-AVR   Posted: Fri Aug 14, 2020 8:05 pm   Subject: ADC1 & xtiny (ATTINY3217)
Mark, thank you for great support. I have quite some work to do in the meantime. If I will be done before you release the update, then I will ask for beta, otherwise I will wait for the tested update.
  Topic: ADC1 & xtiny (ATTINY3217)
Skrivo

Replies: 4
Views: 317

PostForum: BASCOM-AVR   Posted: Fri Aug 14, 2020 12:32 pm   Subject: ADC1 & xtiny (ATTINY3217)
I see....ATtiny816 only has ADC0...

I won't dig into registers to run ADC1 as this eats way too much time, I will rather manage other things while waiting for the update Cool
  Topic: ADC1 & xtiny (ATTINY3217)
Skrivo

Replies: 4
Views: 317

PostForum: BASCOM-AVR   Posted: Fri Aug 14, 2020 10:43 am   Subject: ADC1 & xtiny (ATTINY3217)
ATtiny3217 has 2 ADCs (ADC0 and ADC1). In xtiny Bascom "Config ADC0" works and "Config ADC1" is not even recognized. How can I now configure ADC1 (I need to read voltage on pin 19 (ADC1/AIN8))?

"Ge ...
  Topic: PWM & xtiny (ATTINY3217)
Skrivo

Replies: 14
Views: 579

PostForum: BASCOM-AVR   Posted: Thu Aug 13, 2020 10:34 pm   Subject: PWM & xtiny (ATTINY3217)
the equivalent code is : Config Tca0 = Pwm_bot , Prescale = 1 , Resolution = Normal , Compare0 = Enabled , Run = On

there are actually 2 modes that do bottom/bottom i chose the single slope while y ...
  Topic: PWM & xtiny (ATTINY3217)
Skrivo

Replies: 14
Views: 579

PostForum: BASCOM-AVR   Posted: Thu Aug 13, 2020 8:12 am   Subject: PWM & xtiny (ATTINY3217)
I think that this should be the same :

Config Tca0 = Pwm , Prescale = 1 , Resolution = Normal , Compare0 = Enabled
Tca0_per = Your Icr Value
Tca0_cmp0 = Your Compare Value

output should be on ...
  Topic: Clock frequency
Skrivo

Replies: 25
Views: 1012

PostForum: BASCOM-AVR   Posted: Wed Aug 12, 2020 12:27 pm   Subject: Clock frequency
Hello Mark
I am aware that this is not a support point for the system, but since I have experienced that a lot of people run into the same problem and then solve the same thing unnecessarily and over ...
  Topic: PWM & xtiny (ATTINY3217)
Skrivo

Replies: 14
Views: 579

PostForum: BASCOM-AVR   Posted: Wed Aug 12, 2020 7:45 am   Subject: PWM & xtiny (ATTINY3217)
indeed one of the big advantage is that you can change $regfile and most code will work. but that also depends on the hardware.
The timers in the normal AVR are different compared to the ones with XM ...
  Topic: PWM & xtiny (ATTINY3217)
Skrivo

Replies: 14
Views: 579

PostForum: BASCOM-AVR   Posted: Wed Aug 12, 2020 7:44 am   Subject: PWM & xtiny (ATTINY3217)
to me it seems that this site takes "EOL" based on how many years is in production
but EPSECIALY mega328 is so wide spreaded in so many applications (including arduino)
which make IMPOSSIBLE to thi ...
  Topic: PWM & xtiny (ATTINY3217)
Skrivo

Replies: 14
Views: 579

PostForum: BASCOM-AVR   Posted: Wed Aug 12, 2020 7:00 am   Subject: Re: PWM & xtiny (ATTINY3217)
The company I work for requested to switch from old ATTINY84A to ATTINY3217 - we got information that ATTINY84A will be in production max. till 2025 and that is ALARM!!! The same is true for popular A ...
  Topic: PWM & xtiny (ATTINY3217)
Skrivo

Replies: 14
Views: 579

PostForum: BASCOM-AVR   Posted: Tue Aug 11, 2020 12:00 pm   Subject: PWM & xtiny (ATTINY3217)
I probably don't understand what you're talking about, but the advantage of Bascom and its biggest advantage is that you don't really have to change anything and adjust it manually. The environment wi ...
  Topic: PWM & xtiny (ATTINY3217)
Skrivo

Replies: 14
Views: 579

PostForum: BASCOM-AVR   Posted: Tue Aug 11, 2020 11:06 am   Subject: PWM & xtiny (ATTINY3217)
The company I work for requested to switch from old ATTINY84A to ATTINY3217 - we got information that ATTINY84A will be in production max. till 2025 and that is ALARM!!! The same is true for popular A ...
 
Page 1 of 1
All times are GMT + 1 Hour
Jump to: