Author |
Message |
Topic: OLED SSD1306 parallel mode library |
Mrshilov
Replies: 10
Views: 6450
|
Forum: Share your working BASCOM-AVR code here Posted: Fri May 08, 2020 2:41 pm Subject: OLED SSD1306 parallel mode library |
Replace lib, |
Topic: KWH028Q34-F01 Display with ILI9341 |
Mrshilov
Replies: 3
Views: 438
|
Forum: BASCOM-AVR Posted: Mon Mar 18, 2019 9:37 pm Subject: KWH028Q34-F01 Display with ILI9341 |
I don't find any documentation about KWH028Q34-F01 but, as I see in attached interface description, this display has RGB interface for displaying data and I2C - for control. Such display often used i ... |
Topic: Library for ST7735R display |
Mrshilov
Replies: 28
Views: 40741
|
Forum: Share your working BASCOM-AVR code here Posted: Wed Feb 06, 2019 12:54 pm Subject: Library for ST7735R display |
CS must be connected to GND.
RST - to Vcc. |
Topic: GLCD-UC1608-SPI library from Mrshilov and XMega |
Mrshilov
Replies: 3
Views: 679
|
Forum: BASCOM-AVR Posted: Fri Nov 02, 2018 11:21 pm Subject: GLCD-UC1608-SPI library from Mrshilov and XMega |
Try to use virtual port. Like this:
$regfile = "xm256a3udef.dat"
$crystal = 32000000
$hwstack = 100
$swstack = 100
$framesize = 100
Config Osc = Disabled , 32mhzosc = Enabled
Conf ... |
Topic: LCD HX1230 |
Mrshilov
Replies: 2
Views: 633
|
Forum: BASCOM-AVR Posted: Wed Oct 31, 2018 8:37 pm Subject: LCD HX1230 |
Try this:
https://www.mcselec.com/index2.php?option=com_forum&Itemid=59&page=viewtopic&t=12186 |
Topic: OLED SSD1306 parallel mode library |
Mrshilov
Replies: 10
Views: 6450
|
Forum: Share your working BASCOM-AVR code here Posted: Sat Oct 13, 2018 5:50 pm Subject: OLED SSD1306 parallel mode library |
You may use direct commands:
Glcdcmd &HAE 'Display OFF
Glcdcmd &HAF 'Display ON
Also you can power this LCD from mc free port pin and unpower it at all when needed. |
Topic: SAMSUNG-S5230 LCD Library |
Mrshilov
Replies: 11
Views: 6987
|
Forum: Share your working BASCOM-AVR code here Posted: Sun Sep 16, 2018 10:08 pm Subject: SAMSUNG-S5230 LCD Library |
I found an original display S5230 and confirm doublescreen and flicker. I correct init and now it works nice.
Replace existing init subroutine in library with this one: |
Topic: SSD1306 Oled I2c 0.96 inch |
Mrshilov
Replies: 52
Views: 38749
|
Forum: BASCOM-ARDUINO Posted: Thu Aug 23, 2018 9:38 pm Subject: SSD1306 Oled I2c 0.96 inch |
All strings "RCALL _UPDATE_SCREEN" in library must be changed to "gosub _UPDATE_SCREEN". |
Topic: LCD ST7567 library |
Mrshilov
Replies: 5
Views: 8159
|
Forum: Share your working BASCOM-AVR code here Posted: Sun Jul 22, 2018 7:48 pm Subject: LCD ST7567 library |
Display from Zalman VE300/VE400, IODD2531, IODD2541 (USB Removable Flash Drive) also uses ST7567 controller. Resolution 128x32. Named MTC3059P04 or MTC3059FB
http://images.vfl.ru/ii/1532283102/44b4 ... |
Topic: graphic lcd with ili9341 |
Mrshilov
Replies: 4
Views: 2930
|
Forum: BASCOM-AVR Unsupported versions Posted: Sun Jun 10, 2018 7:21 pm Subject: graphic lcd with ili9341 |
In "ILI9341_declaration8.inc" config pins as follow:
' Data ports
Data0 Alias Portd.2 : Config Data0 = Output
Data1 Alias Portd.3 : Config Data1 = Output
Da ... |
Topic: Get Error from USB.inc file |
Mrshilov
Replies: 8
Views: 662
|
Forum: BASCOM-AVR Posted: Sun Mar 18, 2018 3:00 pm Subject: Get Error from USB.inc file |
Yes, "jump out of range" error exist. Try change "RCALL Shl" to "CALL Shl" in Sub Usb_configure_endpoint. |
Topic: Ili9341 |
Mrshilov
Replies: 8
Views: 1299
|
Forum: BASCOM-AVR Posted: Sun Mar 18, 2018 4:19 am Subject: Ili9341 |
Files loaded from https://bascomforum.de/index.php?thread/225-tft-display-ili9341-2-2-und-2-4/ |
Topic: Get Error from USB.inc file |
Mrshilov
Replies: 8
Views: 662
|
Forum: BASCOM-AVR Posted: Sun Mar 18, 2018 4:11 am Subject: Get Error from USB.inc file |
Compiled without errors on 2078...2081.
(Except notdeclared Product_id, Timeoutled, Hc595_reset & Timeout_ausgeloest) |
Topic: 128x64 I2C OLED display SSD1306 |
Mrshilov
Replies: 1
Views: 841
|
Forum: BASCOM-AVR Posted: Sat Mar 10, 2018 5:59 pm Subject: 128x64 I2C OLED display SSD1306 |
Picture displayed properly:
http://images.vfl.ru/ii/1520701135/94cbc8f0/20903604_s.jpg
[/img] |
Topic: 2,9' E-paper display library |
Mrshilov
Replies: 4
Views: 4282
|
Forum: Share your working BASCOM-AVR code here Posted: Mon Feb 05, 2018 9:56 pm Subject: 2,9' E-paper display library |
2.9 inch E-paper display 296x128 (IL3820 controller):
https://www.mcselec.com/userpix/12176_e_paper_1.jpghttp://images.vfl.ru/ii/1517862660/3816cc09/20465325_m.jpg |
|