Forum - MCS Electronics

 

FAQFAQ SearchSearch RegisterRegister Log inLog in

Search found 3195 matches
www.mcselec.com Forum Index
Author Message
  Topic: Read text files from pen drive usb
Luciano

Replies: 25
Views: 1712

PostForum: BASCOM-AVR Archive   Posted: Sat Jun 08, 2013 7:54 am   Subject: Read text files from pen drive usb
Hi,

you could also use a microSD card formatted FAT32 and AVR-DOS. To use the microSD card
with a PC, just plug the card into a Micro SD-USB Adapter (see attached picture).

Best regards,

Lu ...
  Topic: Sample Electronics programmer not working in Win 7
Luciano

Replies: 49
Views: 1666

PostForum: BASCOM-AVR Archive   Posted: Wed May 22, 2013 10:21 am   Subject: Sample Electronics programmer not working in Win 7
Hi Mark,

The BIOS, PCI bus and OS will automatically take care to assign addresses
to the PCI card when the PC is powered on and the OS booted. With Bascom
you are using the card in SPP mode so ...
  Topic: Sample Electronics programmer not working in Win 7
Luciano

Replies: 49
Views: 1666

PostForum: BASCOM-AVR Archive   Posted: Tue May 21, 2013 2:29 pm   Subject: Sample Electronics programmer not working in Win 7
Hi Mark,

The BIOS of the motherboard does not have an interface where you can change the default
transfer mode (SPP/EPP/ECP) of a PCI parallel port card installed in a PCI slot. (Only
the paralle ...
  Topic: Windows 7 x64/Setupio CPU usage problem
Luciano

Replies: 21
Views: 1549

PostForum: Various   Posted: Tue May 21, 2013 11:14 am   Subject: Windows 7 x64/Setupio CPU usage problem
Update:

The driver problem will be solved in Bascom 2.0.7.7.

For now you can use this solution: [url=http://www.mcselec.com/index2.php?option=com_forum&Itemid=59&page=viewtopic&p=601 ...
  Topic: Sample Electronics programmer not working in Win 7
Luciano

Replies: 49
Views: 1666

PostForum: BASCOM-AVR Archive   Posted: Tue May 21, 2013 11:03 am   Subject: Sample Electronics programmer not working in Win 7
Hi Mark,

Everything working now, thank you!

This is what I have done on my Windows 7 Ultimate 64-bit system:

(The driver problem will be solved in Bascom 2.0.7.7, no need to do the
steps bel ...
  Topic: Sample Electronics programmer not working in Win 7
Luciano

Replies: 49
Views: 1666

PostForum: BASCOM-AVR Archive   Posted: Mon May 20, 2013 5:48 pm   Subject: Sample Electronics programmer not working in Win 7
Hi Mark,

I have tested with the Bascom full setup (2.0.7.6) and after setup
and reboot I get this error in the Windows system log:
(Which is the same error as last year).

===================== ...
  Topic: Sample Electronics programmer not working in Win 7
Luciano

Replies: 49
Views: 1666

PostForum: BASCOM-AVR Archive   Posted: Mon May 20, 2013 2:11 pm   Subject: Sample Electronics programmer not working in Win 7
Hi Mark,

You need a card with a brand name and model number so that you can
test it with Bascom and recommend it to your customers.
On the Exsys web site you can download the driver and manual ...
  Topic: Sample Electronics programmer not working in Win 7
Luciano

Replies: 49
Views: 1666

PostForum: BASCOM-AVR Archive   Posted: Mon May 20, 2013 1:43 pm   Subject: Sample Electronics programmer not working in Win 7
Hi Mark,

I use an EX-41150 PCI card made by Exsys with two serial ports and one parallel port. [url=http://www.exsys.ch/index.php?main_page=product_info&products_id=465]LINK
Datasheet: [url=ht ...
  Topic: Sample Electronics programmer not working in Win 7
Luciano

Replies: 49
Views: 1666

PostForum: BASCOM-AVR Archive   Posted: Mon May 20, 2013 12:29 pm   Subject: Sample Electronics programmer not working in Win 7
Hi Mark,

Last year I spent some time trying to find out what was wrong with
tvicport64.sys on W7 64-bit and my conclusion was that the driver did
not have a valid digital signature and therefor ...
  Topic: Flash area writing
Luciano

Replies: 9
Views: 335

PostForum: BASCOM-AVR Archive   Posted: Sat Jan 05, 2013 8:26 pm   Subject: Flash area writing
Hi,

Use two bytes of SRAM in the DS1307 RTC chip, in the first byte you store a flag,
in the second byte you store your value.

(Pseudocode)

When you write:

- Write 170 in the first byte ...
  Topic: Flash area writing
Luciano

Replies: 9
Views: 335

PostForum: BASCOM-AVR Archive   Posted: Sat Jan 05, 2013 4:04 pm   Subject: Flash area writing
Hi,

I read from one of your previous post that you are using the DS1307.
Just use the non-volatile SRAM of your RTC chip.


The DS1307 serial real-time clock (RTC) is a lowpower,
full binary- ...
  Topic: ON ADC DO_SOMETHING
Luciano

Replies: 6
Views: 479

PostForum: BASCOM-AVR Archive   Posted: Tue Oct 16, 2012 9:48 am   Subject: ON ADC DO_SOMETHING
Hi,

(See first the message posted by Hubert).

You could use a dedicated AVR chip to do that, and in a loop read the ADC
values of the three trim pots and when a change occurs, with a pin of th ...
  Topic: IDE Interface, Wide Screen LCD Displays, 2 pages?
Luciano

Replies: 2
Views: 243

PostForum: BASCOM-AVR Archive   Posted: Thu Jun 28, 2012 4:51 pm   Subject: IDE Interface, Wide Screen LCD Displays, 2 pages?
Hi,

You could use a monitor with pivot functionality.

Like that: [url=http://www.youtube.com/watch?v=zfwKfa1vkM8]LINK

Best regards,

Luciano
  Topic: s = hex(const)
Luciano

Replies: 5
Views: 181

PostForum: BASCOM-AVR Archive   Posted: Tue May 29, 2012 1:35 pm   Subject: s = hex(const)
Hi,

Try that:
Const MyStringHexValue = "AA"
Dim Str_a As String * 30
Str_a = MyStringHexValue
The HEX() function expects a variable and will use code space and resources at run-time. ...
  Topic: Libray for character LCD modules (Busy flag/random pins)
Luciano

Replies: 67
Views: 17100

PostForum: Share your working BASCOM-AVR code here   Posted: Sun May 13, 2012 2:28 pm   Subject: Libray for character LCD modules (Busy flag/random pins)
Hi Frank,

Not really useful because the LCD can also crash while its busy flag is low.
You can also have an LCD where the communication works OK but with
no output on the LCD because the displa ...
 
Page 1 of 213 Goto page 1, 2, 3 ... 211, 212, 213  Next
All times are GMT + 1 Hour
Jump to: