1. Install PonyProg to c:\Program Files\PonyProg2000\ (PonyProg v205a or later)
2. Copy these files to c:\Program Files\PonyProg2000\
	file.sip
	SI-Prog.exe
3. Open Bascom AVR
4. Click Options>>Programmer
5. Select "External programmer" in Programmer
6. Browse to C:\Program Files\PonyProg2000\SI-Prog.exe in Program
7. Enter {FILE} in Parameter
8. Enable 'Use HEX file'

Note: Unless you know what you are doing, DO NOT edit file.sip
      SI-Prog.exe and file.sip can be copied to any folder (but both must be in the same folder)