Search found 24 matches

hereby the OLED display i use

http://www.winstar.com.tw/products_detail_ov.php?lang=en&ProID=274

Hi,

I have an working source and use an regulair Winstar LCD display and it work fine
now i have bought an Oled display also from Winstar and now the Oled starts up OK
but after the first waitms ...

you must control wireless and the device must be wireless

hi,

I have an code that work as follow on the STK500

when start up the you have to push the first switch, and the led goes off
then you have random 8 switches and 8 led that must be turn off by ...

Does anyone can help me with the Bascom routine for Atapi (IDE controller)
i have several sources that i want to modify and use in my Diy project

do you have already some info?

Sorry for that.

OK I have an schematic and I want this work bascom
I'm totally new in programming but i want to learn this.

See schematic i now have change this source first step
does i forget ...

I have the source of an program witch is written in C use for ATmega 8
i thought it only work with bascom but it work also in C
now i want to change the source but i only have AVRISP and the softwar ...

is there nobody that can help me out with this

I have got the codes for C
maby there is somebody can help me with coding to bascom

//********************************************
// ATAPI Commands
//********************************** ...

hereby the code

'Odtwarzacz CD ver.2.0
'Marcin Wi¹zania

$crystal = 8000000
Config Rc5 = Pind.2
Config Watchdog = 1024
Stop Watchdog
Config Lcd = 16 * 2
Config Lcdpin = Pin , Db4 = Portb.3 ...

i have build the CD rom controller to use for my DIY cd player
but the source is not complete.

i have evrything working accept

open close button (only by cd-rom) need for remote
direct access ...

Kim,

i don't know how a can add an attachment.

i only have an HEX file that works perfect with the schematic drawing
and when i use the source file in the first post converted to atmega 16
wit ...

the code works OK, and also the warm up for the tube
only the remote does not react quick.

when i change the hex file into this it work fine

Hi Kim,

i have try this the same problem, have to push weveral times